AC Infinity 悬挂式药草干燥架 | 直径 24 英寸 | 八层

Eight Tiers. One Footprint. Zero Wasted Space.

Every post-harvest operation eventually confronts the same silent drain: material spread across improvised surfaces, airflow blocked by overcrowding, chambers that cannot be isolated, and a setup that requires full disassembly just to relocate. The enemy is not a single bad decision — it is the accumulated cost of equipment that was never designed for the space it occupies. Flat trays stack awkwardly, single-tier nets surrender vertical real estate, and unstructured hang-dry arrangements introduce inconsistency across batches that should be uniform. The result is extended dry times, uneven moisture loss across the canopy, and labor hours spent managing a process that should be running itself.

After deployment, the processing environment changes character. Eight independent chambers occupy a single 24-inch diameter column, converting vertical ceiling clearance into active drying capacity without expanding the floor plan. Each tier operates as a discrete environment — zipped closed to contain material, opened individually for inspection or rotation, and isolated from adjacent chambers when differential drying rates require it. The rack hangs from a single anchor point, relocates without tools, and collapses flat for storage between cycles. The operation runs cleaner, the material dries more uniformly, and the square footage that was previously consumed by spread-out trays is returned to productive use.

The mechanism behind that outcome is straightforward engineering. The AC-DRA68 is built on a flexible steel wireframe enveloped in non-toxic polyester mesh 0.05 inches thick, forming a structure that holds its cylindrical shape under load while remaining collapsible for transport and storage. Eight chambers are stacked vertically across a 51-inch total length, each chamber standing 6.75 inches high with a full-perimeter zipper for sealed access. The 24-inch diameter provides sufficient surface area per tier for meaningful material volume without creating dead zones at the center of the mesh. A built-in Velcro loop at the top of the frame enables direct suspension from tent crossbars, closet rods, ceiling hooks, or structural anchors without requiring additional hardware. In practical terms, the AC Infinity Drying Rack 68 delivers eight individually accessible 6.75-inch chambers across a 24-inch diameter footprint within a 51-inch vertical column, mountable from a single Velcro loop anchor point.

Where This Belongs (and Doesn't)

The AC-DRA68 is a passive drying and curing fixture. It does not generate airflow, regulate temperature, or control humidity. Effective drying outcomes depend on the environmental conditions of the surrounding space. Pair with a calibrated environmental control system for consistent results.

How It Works

The AC-DRA68 is constructed around a flexible steel wireframe core that provides structural rigidity under loaded conditions while retaining the ability to collapse along its vertical axis for flat storage and transport. The wireframe is fully enveloped in non-toxic polyester mesh with a material thickness of 0.05 inches (1.5 mm), creating a breathable chamber wall that allows passive airflow through the mesh surface while containing material within each tier. The cylindrical form factor — 24 inches (60.0 cm) in diameter — is maintained by the wireframe geometry without requiring external support structures or assembly hardware.

Eight discrete chambers are distributed across the 51-inch (129.5 cm) total length of the rack. Each chamber stands 6.75 inches high and is sealed by a full-perimeter zipper, allowing individual tiers to be opened for loading, inspection, or rotation while adjacent chambers remain closed and undisturbed. This isolation capability is operationally significant: material at different stages of the drying curve can occupy the same rack simultaneously without cross-contamination or unintended airflow mixing between tiers.

Suspension is handled by a built-in Velcro loop integrated into the top of the frame. The loop is designed for direct attachment to tent crossbars, closet rods, ceiling hooks, or any structural horizontal member without requiring carabiners, S-hooks, or supplemental hanging hardware. When the drying cycle is complete or the rack needs to be relocated, the frame collapses to a compact form for storage or transport. In practical terms, the AC Infinity Drying Rack 68 delivers eight individually zippered 6.75-inch chambers within a 24-inch diameter, 51-inch vertical column, suspended from a single built-in Velcro anchor point on a collapsible steel wireframe chassis.

Commercial Assurance

• Manufacturer: AC Infinity Inc. — engineered post-harvest and cultivation infrastructure
• Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer for AC Infinity products
• Material Safety: Non-toxic polyester mesh construction — no off-gassing risk to drying material
• Warranty: Warranty period not specified in manufacturer source data — contact Cannafull Spectrum Solutions or AC Infinity directly for current warranty terms before purchase
• UPC: 819137022058 | SKU: AC-DRA68
• Compliance Note: Passive drying fixture — no electrical components, no certification requirements applicable to this product category

System Integration

• Environmental Control Pairing: Integrate with an inline fan, carbon filter, and humidity controller to maintain target vapor pressure deficit (VPD) within the drying environment — the rack's mesh walls rely on ambient airflow for effective moisture evacuation
• Tent Compatibility: The 24-inch diameter fits within standard 4×4 grow tent footprints when suspended from the central crossbar; verify ceiling clearance against the 51-inch total length before deployment
• Multi-Rack Scaling: Multiple AC-DRA68 units can be suspended in parallel within larger drying rooms where overhead anchor points are available, expanding tiered capacity without increasing floor footprint
• Harvest Workflow: Position within the post-harvest processing sequence between wet trim and final cure — the zippered chamber design supports staged rotation as individual tiers reach target moisture content
• Storage Protocol: Collapse the frame between cycles and store flat to preserve wireframe geometry and mesh integrity across repeated deployments

Facility Integration Data

The following table models per-unit and fleet-level capital outlay for the AC-DRA68 at the MAP price of $29.99, providing a reference for procurement planning across single-operator and multi-unit deployments.

Capital outlay calculated at MAP price of $29.99 per unit. Fleet pricing and volume availability — contact Cannafull Spectrum Solutions directly.

Operator Field Notes

• Zipper Isolation: Each chamber's perimeter zipper allows individual tiers to be loaded, inspected, or rotated independently — do not leave zippers partially open during active drying cycles, as this disrupts the intended airflow boundary between chambers
• Anchor Point Load: The Velcro loop is designed for direct suspension from standard tent crossbars and closet rods — verify that the anchor point can support the combined weight of the rack and loaded material before hanging at full capacity
• Airflow Dependency: The mesh walls are breathable but passive — the rack does not generate airflow internally; position within an environment where air circulation reaches all sides of the cylindrical frame for uniform drying across all eight tiers
• Collapse Protocol: Collapse the wireframe along its vertical axis before transport or storage; forcing the frame laterally rather than axially risks deforming the steel wireframe geometry and compromising chamber alignment on reassembly
• Material Compatibility: The non-toxic polyester mesh is suitable for herbs, buds, fruits, flowers, seeds, and vegetables — do not load material with residual liquid saturation that would pool against the mesh surface and restrict passive evaporation
• Diameter Clearance: Confirm 24-inch diameter clearance at the intended hang point before deployment in confined spaces — the cylindrical frame does not compress laterally and requires full diameter clearance at every tier level

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times are provided at checkout and are subject to carrier availability and destination.
• Returns: Returns are accepted for items in original, uninstalled condition. Contact Cannafull Spectrum Solutions within the applicable return window to initiate a return authorization before shipping any product back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions directly through the store contact page at cannafullspec.com before initiating any return or freight claim.

What's in the Box

• 1× AC Infinity Drying Rack 68 (AC-DRA68) — 24" diameter, 51" length, eight-tier collapsible mesh drying rack with built-in Velcro mounting loop

Box contents are confirmed from manufacturer source data. No supplemental hardware, hanging hooks, or assembly tools are listed as included items. Verify package contents upon receipt and contact Cannafull Spectrum Solutions immediately if the delivered contents do not match the above. Do not discard original packaging until contents have been inspected.

Regional Compliance & Deployment Notes

• Passive Fixture Classification: The AC-DRA68 contains no electrical components, no powered systems, and no regulated materials — it is not subject to electrical safety certification requirements (UL, ETL, or equivalent) applicable to powered cultivation equipment
• Material Contact Compliance: The non-toxic polyester mesh construction is specified by the manufacturer as safe for contact with plant material; operators in licensed facilities should verify that passive drying equipment meets any applicable state-level material contact or sanitation standards for their specific license type
• Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions; no distribution to Canadian provinces or territories is available through this channel
• Regulatory Responsibility: Compliance with state and local regulations governing post-harvest processing equipment in licensed facilities is the sole responsibility of the purchasing operator; Cannafull Spectrum Solutions does not provide regulatory compliance certification for individual facility applications
• No Health Canada or CSA Language Applicable: This listing is prepared for U.S. distribution only; no Canadian regulatory standards, certifications, or compliance frameworks are referenced or implied

Product specifications, pricing, and availability are subject to change without notice. All data presented in this listing is sourced from manufacturer documentation available at time of publication. Cannafull Spectrum Solutions makes no representations beyond what is stated in manufacturer source data. Verify current specifications directly with AC Infinity Inc. for procurement-critical applications. SKU AC-DRA68 | UPC 819137022058 | Manufacturer: AC Infinity Inc.