Bomba de agua Vortex V-SYSTEM de Alien Hydroponics, 370 W, 120 V, 13 200 l/h

Quick Spec: SKU BD101-5006  |  370W  |  120V  |  13,200 l/h flow rate  |  $370.00 USD

Precision Control in Any Space

Every irrigation system has a failure point that doesn't announce itself — it accumulates. Undersized pumps starve the far end of a top-feed manifold while oversaturating the near end. Pumps that can't sustain rated flow under head pressure force operators into manual correction cycles: adjusting timers, repositioning lines, chasing dry pockets and wet spots across the same canopy. That guesswork compounds across every feed event, every day, until inconsistent results become the baseline expectation rather than the exception. The equipment that was supposed to simplify operations becomes the source of the problem.

After deploying the V-SYSTEM Vortex Pump, the irrigation architecture stops being a variable. Reservoir turnover happens on schedule. Top-feed lines receive uniform pressure from the first emitter to the last. Drain-to-waste cycles execute without operator intervention because the pump delivers what the system was designed to receive — consistent volume, consistent timing, consistent results. The facility runs the feed program; the feed program stops running the facility.

The mechanism behind that operational stability is straightforward: 370 watts of motor draw on a standard 120V circuit producing a rated flow of 13,200 liters per hour. That output capacity is sufficient to drive high-emitter-count top-feed manifolds, maintain active reservoir circulation in large-format systems, and sustain the hydraulic pressure required for drain-to-waste configurations where head height and line length would otherwise cause flow degradation. The single-SKU configuration (BD101-5006) eliminates selection complexity — one pump, one voltage standard, one flow specification. In practical terms, the V-SYSTEM Vortex Pump delivers 13,200 l/h of irrigation flow at 370W on a 120V circuit, making it a direct-install solution for craft-scale hydroponic systems without requiring voltage conversion or supplemental pump staging.

Where This Belongs (and Doesn't)

Electrical note: The V-SYSTEM Vortex Pump draws 370W on a 120V circuit. Verify that the circuit serving the pump location is rated for continuous-duty loads and is not shared with high-draw equipment that could cause voltage sag or tripped breakers. Consult a licensed electrician before installation if circuit capacity is uncertain.

How It Works

The V-SYSTEM Vortex Pump operates on a vortex impeller design, which distinguishes it from standard centrifugal pumps in one operationally significant way: vortex impellers generate flow through rotational fluid dynamics rather than direct blade contact with the water column. This architecture reduces the mechanical sensitivity to particulate matter — nutrient solution residue, root fragments, and mineral deposits that accumulate in active irrigation systems — and sustains rated flow output over longer continuous-duty cycles without the performance degradation that clogs standard impeller designs.

At the electrical level, the pump draws 370 watts from a standard 120V AC supply. The rated flow output is 13,200 liters per hour. That figure represents the pump's open-flow capacity — the volume it moves under zero head pressure. In real-world installation conditions, effective flow will be reduced by head height, line length, and fitting resistance. Operators should calculate system head loss against the pump's performance curve to confirm that the working flow rate at their specific installation geometry meets the minimum threshold required by their irrigation design. No head pressure curve data was present in the source specifications; contact the supplier for manufacturer performance curve documentation before finalizing system design in high-head applications.

Power consumption at 370W positions this pump in the mid-range of commercial irrigation pump draw — sufficient for serious production-scale flow requirements without the electrical infrastructure demands of larger three-phase units. The 120V voltage standard means the pump integrates directly into standard facility circuits without requiring dedicated high-voltage drops or phase conversion. In practical terms, the V-SYSTEM Vortex Pump delivers 13,200 l/h of rated flow at 370W on a 120V single-phase circuit, making it a direct-install solution for craft-scale facilities operating on standard commercial electrical infrastructure.

Commercial Assurance

System Integration

• Reservoir Compatibility: Designed for submersible operation in nutrient reservoirs; confirm reservoir volume and turnover rate targets against the 13,200 l/h rated output before finalizing pump selection.
• Plumbing Interface: Outlet fitting dimensions are not specified in source data — verify fitting size against existing manifold or irrigation line specifications before ordering to avoid adapter requirements.
• Electrical Integration: Requires a 120V AC circuit rated for continuous-duty 370W draw; do not share the circuit with other high-draw equipment without confirming total circuit capacity.
• Controller Compatibility: The pump operates at fixed speed as specified; variable-flow applications require an external pump speed controller or timer-based duty cycling to modulate effective delivery volume.
• Drain-to-Waste Systems: Suitable for timed irrigation delivery in drain-to-waste configurations; pair with a programmable irrigation timer to automate feed cycles and eliminate manual operation.

Facility Integration Data

The table below provides a fleet-scale cost reference for facilities evaluating multi-unit pump deployment across irrigation zones, with Sezzle installment financing reflected for cash-flow planning purposes.

Operator Field Notes

• Confirm fitment before ordering: Physical dimensions are not specified in the manufacturer source data for SKU BD101-5006. Measure the installation cavity and outlet plumbing interface before placing an order, particularly in space-constrained reservoir configurations.
• Head pressure planning is non-optional: The 13,200 l/h rating is an open-flow figure. Any vertical lift, line length, or fitting restriction reduces effective output. Request the manufacturer's head pressure curve from Cannafull Spectrum Solutions support before finalizing system design.
• Dedicated circuit recommended: At 370W continuous draw, this pump should occupy its own circuit or share only with loads that have been verified against the circuit's continuous-duty rating. Nuisance tripping in irrigation systems causes feed cycle failures that compound across multiple events.
• Vortex impeller maintenance interval: Vortex-design pumps are more tolerant of particulate than standard centrifugal designs, but nutrient salt accumulation on the impeller housing will degrade performance over time. Establish a scheduled cleaning interval based on your nutrient solution's mineral load.
• Timer integration: For drain-to-waste applications, pair this pump with a programmable irrigation timer rated for the pump's amperage draw. Verify the timer's relay rating against the pump's startup inrush current, which typically exceeds steady-state draw.
• Warranty confirmation required: Warranty terms are not present in the source data. Do not assume a warranty period. Contact cannafullspec.com before purchase to obtain written warranty documentation for this SKU.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Carrier & Transit: Shipping method and estimated transit times are confirmed at checkout based on destination and current carrier availability. Contact support for freight or expedited options on multi-unit orders.
• Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Product must be in original, uninstalled condition to qualify. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at cannafullspec.com — pre-sale technical support is available for fitment, performance curve, and warranty confirmation inquiries.

What's in the Box

• V-SYSTEM Vortex Water Pump 370W 120V (SKU BD101-5006) — 1 unit

Note: Included accessories, mounting hardware, fittings, and documentation are not specified in the manufacturer source data for this SKU. Contact Cannafull Spectrum Solutions at cannafullspec.com to confirm complete box contents before ordering, particularly if specific fittings or adapters are required for your plumbing configuration.

Regional Compliance & Deployment Notes

• Electrical Code Compliance: Installation of this pump must comply with the National Electrical Code (NEC) and all applicable local electrical codes. Verify circuit ratings and grounding requirements with a licensed electrician prior to installation.
• Water & Plumbing Regulations: Operators in jurisdictions with specific agricultural water use, nutrient discharge, or wastewater regulations should confirm that their drain-to-waste or recirculating system design complies with applicable state and local environmental requirements.
• Licensed Facility Requirements: Operators in licensed cultivation facilities should confirm that pump specifications and installation methods meet any equipment standards required by their state licensing authority.
• Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. No international or Canadian fulfillment is available.
• Certification Status: Electrical safety certification details (UL, ETL, or equivalent) are not specified in the manufacturer source data for SKU BD101-5006. Facilities operating under strict equipment certification requirements should confirm certification status with Cannafull Spectrum Solutions support before purchase.

Compliance requirements vary by state, county, and licensing jurisdiction. The information above is provided as a general operational reference and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions recommends that all operators consult with qualified legal, electrical, and regulatory professionals to confirm that equipment selection and installation practices meet the specific requirements of their licensed facility and jurisdiction. Specifications subject to change by the manufacturer without notice; confirm current data with Cannafull Spectrum Solutions prior to procurement.