Tubo hidropónico Alien de 32 mm, rojo, espiral de 1 metro

Quick Spec: SKU BD101-3004  |  Diameter: 32mm  |  Length: 1 Meter  |  Configuration: Spiral  |  Color: Red  |  Price: $34.99 USD  |  Brand: ALIEN Hydroponics

Precision Control in Any Space

The real cost of a poorly routed irrigation circuit is not the fitting that fails — it is the cumulative variance that builds across every feed cycle when pipe geometry is left to chance. Flexible tubing that shifts position between waterings, kinks under reservoir pressure, or collapses at connection points introduces inconsistency that compounds over time. In a top-feed or drain-to-waste system, that inconsistency means uneven saturation across the root zone, unpredictable runoff volumes, and the kind of guesswork that makes dialing in a feed schedule an exercise in frustration rather than a repeatable operational procedure. Equipment that fights you at the infrastructure level costs you at the canopy level — and the loss is silent until it shows up in your results.

After integrating fixed-geometry spiral pipe into an irrigation circuit, the feed line holds its position. Every watering event delivers nutrient solution through the same physical path, at the same angle, to the same point of distribution. Reservoir pressure is not fighting a collapsing tube. The operator is not re-routing lines between cycles. The system runs the way it was set up to run — and that repeatability is the foundation on which consistent results are built. Maintenance intervals become predictable. Feed schedules become trustworthy. The infrastructure stops being a variable.

The ALIEN Hydroponics Pipe 32mm Red 1 Meter Spiral achieves this through a spiral configuration in a 32mm-diameter rigid pipe format cut to a 1-meter working length. The spiral geometry maintains the pipe's positional integrity under operating conditions, resisting the deformation and displacement that undermine flexible alternatives. The 32mm bore is sized for the flow demands of commercial-grade top-feed and drain-to-waste circuits, providing adequate cross-sectional area to sustain consistent delivery rates without pressure drop artifacts from undersized tubing. The red color coding supports circuit identification in multi-line reservoir configurations where feed, return, and drain lines must be distinguished at a glance. In practical terms, the ALIEN Hydroponics 32mm Spiral Pipe delivers fixed-geometry irrigation routing across a 1-meter run in a 32mm-diameter spiral configuration priced at $34.99 USD per unit (SKU BD101-3004).

Where This Belongs (and Doesn't)

This pipe is a passive irrigation infrastructure component. It does not regulate flow rate, pressure, or nutrient concentration. Compatibility with specific reservoir fittings, manifolds, and pump outputs should be verified against your system's 32mm connection specifications before installation. Cannafull Spectrum Solutions recommends consulting your system schematic or ALIEN Hydroponics technical documentation for fitting compatibility.

How It Works

The spiral configuration is the functional core of this pipe's performance advantage. Unlike straight-cut rigid pipe, which can shift axially under pump pressure or thermal expansion, the spiral geometry creates a self-stabilizing form factor. The coiled structure distributes mechanical stress along the length of the pipe rather than concentrating it at connection points, which reduces the risk of fitting stress and joint separation in continuously cycling irrigation systems. The 32mm internal diameter provides a consistent bore cross-section across the full 1-meter length, ensuring that flow characteristics at the inlet are maintained through to the outlet without constriction artifacts from deformation.

The red color designation is not cosmetic — it is an operational specification. In multi-line irrigation architectures where feed lines, recirculation lines, and drain lines share the same physical space, color coding is a primary tool for preventing misconnection during installation, maintenance, and system reconfiguration. ALIEN Hydroponics' use of red as a line identifier integrates with the broader color-coding logic of their system components, allowing operators to build and service circuits without tracing lines under load. The 1-meter length is a standard working unit that accommodates the most common inter-component distances in compact and mid-scale top-feed configurations without requiring field cutting in the majority of installations. In practical terms, the ALIEN Hydroponics 32mm Red Spiral Pipe delivers a 1-meter fixed-geometry irrigation run with a 32mm bore, spiral stabilization, and red color-coded identification in a single OEM-matched component at $34.99 USD.

Commercial Assurance

System Integration

• Top-Feed Arrays: Connects to ALIEN Hydroponics manifold and distribution fittings sized for 32mm connections; verify fitting compatibility before installation
• Drain-to-Waste Circuits: Suitable for fixed-position drain routing where pipe geometry must remain stable across repeated saturation and dry cycles
• Reservoir Integration: Compatible with 32mm reservoir outlet and inlet fittings in standard ALIEN Hydroponics system configurations
• Multi-Line Identification: Red color coding integrates with ALIEN Hydroponics' line-identification conventions for multi-circuit reservoir builds
• Expansion Builds: Functions as a direct OEM replacement or expansion component in existing ALIEN Hydroponics installations without system modification

Facility Integration Data

The following table provides per-unit and fleet-scale cost reference for procurement planning across multi-site or multi-circuit irrigation builds using SKU BD101-3004.

Operator Field Notes

• Fitting Verification First: Confirm all connection points in your system accept 32mm pipe before ordering — mismatched fitting sizes are the most common installation error on irrigation builds
• Color-Code Your Circuit Map: Document red-line routing in your system schematic at installation; this eliminates misidentification errors during maintenance and reconfiguration under operational conditions
• Spiral Geometry Handling: Do not force the spiral configuration into a straight-line run — the spiral form is a structural feature, not a defect; route accordingly in your system layout
• Cycle Inspection Protocol: Inspect connection points at fitting junctions after the first 10 feed cycles to confirm seating integrity under your system's operating pressure
• Procurement Depth: For multi-circuit builds, order a minimum 10–15% overage on pipe count to account for field-cut adjustments and future expansion without lead-time delays
• OEM Matching: This component is manufactured by ALIEN Hydroponics and is designed for integration within their system ecosystem — cross-brand fitting compatibility is the operator's responsibility to verify

Shipping & Logistics

• Service Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders from Alaska, Hawaii, U.S. territories, or international addresses cannot be fulfilled.
• Fulfillment: Orders are processed through our authorized fulfillment channel. Estimated lead times are provided at checkout and may vary based on carrier availability and destination.
• Returns: Returns are accepted subject to our Return Policy. Items must be in original, uninstalled condition. Contact support@cannafullspec.com to initiate a return authorization before shipping any product back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For shipping inquiries, volume orders, or return authorizations: support@cannafullspec.com

What's in the Box

• 1x ALIEN Hydroponics Pipe 32mm Red 1 Meter Spiral (SKU BD101-3004)

Box contents are confirmed based on manufacturer product specification for SKU BD101-3004. Ancillary fittings, connectors, manifold components, or installation hardware are not included unless explicitly listed above. Verify system compatibility and required ancillary components before installation. Cannafull Spectrum Solutions is not responsible for components not listed in the confirmed box contents.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only through Cannafull Spectrum Solutions' authorized distribution channel.
• Regulatory Classification: The ALIEN Hydroponics 32mm Red Spiral Pipe is a passive irrigation infrastructure component. It does not contain electrical, chemical, or controlled substance elements subject to federal or state licensing requirements for the component itself. Operators are responsible for ensuring their facility's irrigation system design and operation comply with applicable state and local regulations.
• Facility Compliance: Installation and use of this component within a licensed cultivation facility must conform to that facility's standard operating procedures and any applicable state-level infrastructure or plumbing requirements. Cannafull Spectrum Solutions does not provide compliance consulting services.
• Material Safety: Material composition is not specified in manufacturer source data for this SKU. Operators with facility-specific material safety requirements (food-grade certification, NSF compliance, chemical resistance ratings) should contact ALIEN Hydroponics directly to obtain material data sheets before deployment.

Compliance requirements vary by state and facility license type. The information provided here is for general reference only and does not constitute legal or regulatory advice. Operators are solely responsible for verifying that all equipment and system configurations meet the requirements of their applicable licensing authority. Cannafull Spectrum Solutions ships to licensed and unlicensed facilities within the contiguous 48 United States and makes no representation regarding the suitability of this product for any specific regulatory environment.