Lámpara LED de cultivo comercial IONFRAME EVO6 de AC Infinity, 500 W

Key Specs: 500W | 3.14 µmol/J | 4 x 4 ft. flower coverage | IP-65 | 27.0000 lb. | 2-Year Warranty

Kill Variance. Print Yield.

Legacy HPS infrastructure does not fail loudly — it fails incrementally. Lamp lumen output degrades from the first hour of operation, creating a photon deficit that compounds across every growth cycle without triggering a single alarm. Passive failure points — ballasts running hot, reflectors accumulating particulate, manual timers drifting out of sync — introduce variance that cannot be seen on a walk-through but shows up in canopy density, stretch, and final yield weight. Inconsistent environmental control compounds the problem: rooms that run warm under HPS loads force HVAC systems to compensate, creating humidity swings and vapor pressure deficit instability that no amount of manual adjustment fully corrects. The cost is not a single catastrophic event. It is a slow, invisible tax paid on every harvest.

After deployment of the IONFRAME EVO6, the facility operates on a different logic. Canopy receives uniform photon distribution from a bar-style array engineered to eliminate the hot-spot concentration of single-point sources. Scheduling runs on automated controller logic — SCHEDULE, SUNSET/RISE, and CLOCK modes execute without operator intervention, removing the human error variable from photoperiod management entirely. The removable driver design keeps thermal output separated from the diode array, reducing radiant heat at canopy level and giving HVAC systems a stable, predictable load to manage. Lamp replacement cycles do not exist in this infrastructure. The 50,000-hour rated lifespan means the fixture outlasts multiple equipment refresh cycles for every other system in the room.

The mechanism behind this outcome is a 1,680-diode Samsung LM301H EVO array operating at 500W draw with a measured efficacy of 3.14 µmol/J and a peak PPFD of 1991 µmol/m²/s at the canopy surface. Input voltage acceptance spans 100–277V AC, making the fixture compatible with both standard 120V facility circuits and 240V commercial distribution panels without a transformer. The UIS platform integration enables daisy-chaining of up to 80 fixtures from a single controller, with 10 discrete brightness levels and adjustable Sunset/Rise ramp duration from 0:00 to 6:00 hours — giving cultivation managers automated photoperiod transitions that mirror natural light curves without manual dimmer adjustment. The IP-65 waterproof rating ensures the fixture maintains rated performance in high-humidity cultivation environments without seal degradation. In practical terms, the AC-IF6K delivers 1991 PPFD across a 4 x 4 ft. flower footprint at 500W draw and 5.0A on a 100–277V AC circuit.

Where This Belongs (and Doesn't)

Not recommended for circuits under ~4.17A @120V or ~2.08A @240V per fixture, or unsealed rooms lacking HVAC capacity for expected thermal load.

Minimum infrastructure requirement: a dedicated 20A circuit for single-fixture operation, or verified panel capacity for daisy-chain configurations. HVAC sizing must account for the fixture's thermal output; consult your mechanical engineer before deploying in rooms without existing load calculations for LED infrastructure.

Infrastructure Note: The AC-IF6K draws 5.0A at full power. In daisy-chain configurations of up to 80 units, total amperage load must be calculated against panel capacity and circuit breaker ratings before deployment. Engage a licensed electrician for all multi-fixture installations.

How It Works

The IONFRAME EVO6 operates on a bar-style diode array architecture — 1,680 Samsung LM301H EVO diodes distributed across a 32.28 x 32.67 x 3.38 in. fixture body. The bar-style form factor is not an aesthetic choice; it is an engineering decision that distributes photon output across a wider emission plane than a single-point source, reducing hot-spot intensity at the center of the canopy and improving uniformity at the edges of the 4 x 4 ft. flower footprint. The Samsung LM301H EVO chip platform is the current-generation binning standard for high-efficacy white-spectrum diodes, and at 3.14 µmol/J the EVO6 converts electrical input to photosynthetically active radiation at a rate that legacy HPS infrastructure cannot approach at equivalent wattage.

The removable driver design physically separates the SOSEN-500W driver from the diode array. This is a thermal management decision: drivers generate heat as a byproduct of AC-to-DC conversion, and locating that heat source away from the diode plane reduces junction temperature at the LED level, which directly extends rated lifespan and maintains output stability across the 50,000-hour service life. The driver can be repositioned outside the grow space entirely in installations where thermal management is a primary constraint.

Control architecture runs through the UIS platform. A single UIS-compatible controller manages up to 80 daisy-chained EVO6 fixtures simultaneously, executing five operating modes — OFF, ON, SCHEDULE, SUNSET/RISE, and CLOCK — without per-fixture manual adjustment. The SUNSET/RISE mode ramps intensity across an adjustable 0:00 to 6:00 hour window, simulating natural photoperiod transitions that support hormonal signaling in the crop without abrupt light-state changes. Ten discrete brightness levels give cultivation managers the ability to match photon delivery to crop stage requirements without replacing fixtures or installing external dimmers. The IP-65 waterproof rating ensures the fixture maintains electrical integrity in high-humidity cultivation environments, including rooms where overhead irrigation or foliar application creates ambient moisture. In practical terms, the AC-IF6K delivers 1991 PPFD across a 4 x 4 ft. flower footprint at 500W and 5.0A, with a 50,000-hour rated service life and full UIS controller compatibility for automated multi-fixture deployment.

System Integration

To operate this platform at peak efficiency, verify your ecosystem matches these requirements:

• Controller: UIS-compatible AC Infinity controller required for SCHEDULE, SUNSET/RISE, CLOCK, and multi-fixture daisy-chain operation. Without a UIS controller, the fixture operates in manual ON/OFF mode only.
• Daisy-Chain Capacity: Up to 80 IONFRAME EVO6 units can be linked from a single UIS controller. Total amperage across the chain must be verified against panel capacity before deployment — 80 units at 5.0A each represents a 400A aggregate draw requiring distributed circuit architecture.
• Mounting: Bar-style fixture requires overhead mounting infrastructure rated for a minimum of 27.0000 lb. per fixture. Verify ratchet hangers, rope rigs, or fixed mounting rails for rated load capacity before installation.
• Power Distribution: Input voltage range of 100–277V AC allows integration with both 120V and 240V commercial distribution panels. Confirm circuit breaker rating and wire gauge for the amperage draw at your operating voltage before energizing.
• HVAC: At 500W per fixture, calculate total thermal load for the room based on fixture count. LED thermal profiles differ from HPS — consult your mechanical engineer to verify that existing HVAC capacity is sized for the actual BTU output of the LED array, not the legacy HPS load it replaces.

Facility Integration Data

The following ROI projection and performance comparison are provided to support capital planning and fixture specification decisions. All figures are based on published manufacturer specifications for the AC-IF6K and standard 1000W DE HPS reference data.

Operator Field Note

• Weight and Structural Load: The AC-IF6K weighs 27.0000 lb. Verify that overhead mounting infrastructure — ratchet hangers, rope rigs, or fixed rails — is rated for this load per fixture before installation. In multi-fixture configurations, calculate cumulative structural load on the mounting system.
• Electrical Draw: The fixture draws 5.0A at full power on a 100–277V AC circuit. Do not share a 15A circuit with other high-draw equipment. For daisy-chain configurations, calculate total amperage across all linked fixtures and verify against panel and breaker capacity before energizing.
• Driver Placement: The removable SOSEN-500W driver can be relocated outside the canopy zone to reduce radiant heat at plant level. In rooms where thermal management is a primary constraint, plan driver cable routing and mounting position before fixture installation.
• Operating Temperature Range: The fixture is rated for 32 to 140°F. Facilities operating in environments that approach or exceed the upper limit — including rooms with inadequate HVAC during summer peak loads — must verify ambient temperature at the fixture level, not at the room thermostat.
• IP-65 Rating Scope: IP-65 protects against dust ingress and low-pressure water jets from any direction. It does not qualify the fixture for direct immersion or high-pressure washdown. Adjust sanitation protocols accordingly.

Shipping & Logistics

• Origin: Ships from Cannafull Spectrum Solutions' authorized distribution point within the contiguous 48 United States. We do not ship to Alaska, Hawaii, or international destinations.
• Processing: Orders are processed within 1–2 business days of payment confirmation. Tracking information is provided upon shipment.
• Damage: Inspect all shipments within 48 hours of delivery. Document any freight damage with photographs and contact Cannafull Spectrum Solutions at (888) 378-0017 or sales@cannafullspec.com within that window. Claims submitted after 48 hours may not be eligible for carrier resolution.
• Returns: Returns are accepted within 30 days of delivery for units in original, uninstalled condition. A Return Authorization (RA) number is required before returning any unit. Contact (888) 378-0017 or sales@cannafullspec.com to initiate.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? (888) 378-0017 or sales@cannafullspec.com

What's in the Box

• AC Infinity IONFRAME EVO6 (AC-IF6K) bar-style LED grow light fixture
• SOSEN-500W removable LED driver
• Hanging hardware (ratchet hangers or mounting hardware per manufacturer pack-out)
• Power cord
• UIS daisy-chain cable for controller integration

Note: Box contents are based on available manufacturer data. Verify complete contents upon receipt. Contact Cannafull Spectrum Solutions at (888) 378-0017 if any components are missing or damaged.

Regional Compliance & Deployment Notes