Tienda de cultivo avanzada 2 en 1 AC Infinity CLOUDLAB 864D de 5 x 4 pulgadas, lona Mylar de 2000 D, 60 x 48 x 80 pulgadas

Quick Spec: SKU: AC-CBD864  |  Dimensions: 59.05" x 47.24" x 78.74" (150 x 120 x 200 cm)  |  Canvas: 2000D Mylar  |  Poles: 22mm Steel  |  Frame Capacity: 300 lbs  |  Beam Capacity: 250 lbs  |  Chambers: Dual  |  UPC: 819137022140

Precision Control in Any Space

Every inconsistent run traces back to the same root failure: an enclosure that cannot hold its environment. Light bleeds through seams at the wrong moment and disrupts photoperiod. A single-zone structure forces vegetative and flowering plants into the same atmospheric conditions, compressing your scheduling flexibility and compounding variance across every cycle. The frame flexes under load, the canvas degrades under heat and humidity, and the operator spends more time compensating for equipment failure than executing a cultivation strategy. That is the silent cost of infrastructure that was never designed to hold a controlled environment — not a single variable stays where you set it, and the loss accumulates quietly across every harvest.

After deployment, the operational picture changes structurally. Two independent chambers occupy a single 5x4 footprint, allowing vegetative propagation and flowering to run on separate photoperiod schedules simultaneously — no staggered teardowns, no shared atmospheric compromise. The enclosure holds its internal environment because the structure is built to hold it: light stays contained, humidity gradients stay isolated between zones, and the operator's control inputs actually produce the outcomes they were designed to produce. Scheduling becomes predictable. Output becomes repeatable. The facility runs the crop; the crop does not run the facility.

The mechanism behind that stability is material and structural specification, not marketing language. The canvas is 2000D-rated Mylar — a density classification that resists puncture, retains shape under sustained humidity, and maintains a 100% external lightproof barrier across the full enclosure. The interior surface uses a diamond-patterned reflective design that amplifies photon distribution back toward the canopy rather than absorbing it at the wall. The frame is constructed from 22mm steel tubes and connectors, rated to 300 lbs for suspended equipment across the full frame and 250 lbs on the beam — sufficient to support commercial-grade lighting, fan arrays, and filtration hardware without deflection. Four hanging bars are integrated into the frame architecture. Duct openings are sized at 4", 6", and 8" to accommodate standard inline fan and carbon filter configurations. Side intake holes measure 5.90" x 13.77" (15.0 x 35.0 cm), and mounting straps extend to 5.27" (13.4 cm) for equipment positioning. In practical terms, the CLOUDLAB 864D delivers a dual-zone lightproof cultivation environment within a 59.05" x 47.24" x 78.74" footprint on a 22mm steel frame rated to 300 lbs of suspended load.

Where This Belongs (and Doesn't)

Electrical circuit load calculations, HVAC sizing, and exhaust ducting configurations must be performed by a licensed contractor or qualified facility engineer prior to installation. Cannafull Spectrum Solutions does not provide electrical or mechanical design services. Verify local building and fire codes before deployment.

How It Works

The CLOUDLAB 864D is a dual-chamber enclosed cultivation structure. Its architecture separates a single 59.05" x 47.24" x 78.74" (150 x 120 x 200 cm) interior volume into two independently accessible zones using an internal Mylar divider wall — included in the accessory package — allowing each chamber to operate under a distinct photoperiod, temperature profile, or humidity target without cross-contamination between zones. This is the structural basis for running vegetative and flowering stages concurrently in a single spatial footprint.

The outer shell is Oxford fabric. The interior lining and canvas are 2000D-rated Mylar — a density specification that quantifies the thread count and weave tightness of the base fabric before Mylar lamination. At 2000D, the canvas resists abrasion, puncture, and deformation under the sustained humidity and heat cycling that characterizes active cultivation environments. The 100% external lightproof rating means no photon transmission through seams, zippers, or panel junctions when the enclosure is properly assembled and closed. The interior diamond-patterned reflective surface is not a cosmetic feature — it is a photon management geometry that redirects light from walls and ceiling back toward the canopy plane, improving uniformity of photon distribution without increasing fixture wattage.

The frame is constructed from 22mm steel tubes and connectors. This pole diameter is the structural specification that determines deflection resistance under load. The frame is rated to 300 lbs for full-frame suspended equipment — fans, lights, filtration hardware — and 250 lbs on the beam. Four integrated hanging bars provide fixed attachment points for equipment positioning. Duct openings are available in 4", 6", and 8" diameters to accommodate standard inline fan and carbon filter configurations. Side intake holes measure 5.90" x 13.77" (15.0 x 35.0 cm). Mounting straps extend to 5.27" (13.4 cm). Three spill trays are included for liquid containment. A drying rack is included as a secondary utility component. In practical terms, the CLOUDLAB 864D delivers a dual-zone, 100% lightproof cultivation enclosure within a 59.05" x 47.24" x 78.74" footprint on a 22mm steel frame with a 300 lb suspended load rating and a full accessory package for immediate operational deployment.

Commercial Assurance

System Integration

• Inline Fan and Carbon Filtration: The 4", 6", and 8" duct openings are sized to accept standard inline fan configurations. Pair with an appropriately CFM-rated inline fan and carbon filter to maintain negative pressure and odor control within each chamber independently.
• Environmental Controllers: The included controller plate and adhesive mounting hardware are designed to accept third-party environmental controllers. A controller adhesive set (x6), controller screws (x4), and wall screws (x4) are included for secure mounting without frame modification.
• Lighting Hardware: The 22mm steel frame and four integrated hanging bars support up to 250 lbs on the beam. Ensure that combined fixture weight, driver weight, and ratchet hardware do not exceed this rating. Verify circuit load capacity before connecting high-wattage fixtures.
• Liquid Management: Three spill trays are included. Position trays beneath active containers to contain irrigation runoff and prevent floor contact. Verify tray dimensions against your container footprint prior to final placement.
• Drying Utility: The included drying rack integrates with the existing frame structure, allowing the enclosure to serve a post-harvest drying function without requiring a separate dedicated space.

Facility Integration Data

The following table models procurement and spatial allocation at three fleet scales for facilities deploying multiple CLOUDLAB 864D units across dedicated cultivation rooms or warehouse bays.

Operator Field Notes

• Zipper Sealing Protocol: On initial assembly, run all zippers through their full travel path twice before introducing any light source. This seats the zipper teeth against the lightproof gasket and identifies any misalignment before it becomes a light leak during an active photoperiod cycle.
• Mylar Divider Positioning: The included Mylar wall that creates the dual-chamber configuration must be fully secured at all attachment points before running independent photoperiod schedules. An unsecured divider edge will allow light transmission between chambers and compromise the photoperiod isolation the dual-chamber design is built to deliver.
• Load Distribution on Hanging Bars: The 250 lb beam capacity applies to the full beam assembly. Distribute equipment weight across all four hanging bars rather than concentrating load on a single bar. Verify that combined fixture, driver, and ratchet hardware weight is calculated before final suspension.
• Duct Port Selection: Match duct port diameter to your inline fan's collar size before cutting or opening ports. The 4", 6", and 8" options are pre-configured — using an oversized port without a proper reducer collar will introduce light leaks and reduce negative pressure efficiency.
• Spill Tray Placement: Position all three included spill trays before introducing any irrigation water. Retrofitting tray placement after containers are loaded and watering has begun creates unnecessary handling risk and potential floor contamination.
• Controller Plate Mounting: Use the included controller adhesive (x6) and screws (x4) for controller plate installation. Do not substitute with third-party adhesives that may degrade under humidity cycling — the included hardware is specified for the canvas material and thermal environment inside the enclosure.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international destinations cannot be processed through this storefront.
• Freight Class & Packaging: The CLOUDLAB 864D ships as a standard parcel. Verify delivery address accessibility for standard carrier delivery before completing checkout. Freight damage claims must be initiated within 48 hours of delivery — inspect packaging before signing for receipt.
• Returns: Returns are accepted in accordance with Cannafull Spectrum Solutions' Return Policy. Items must be in original, unassembled condition with all included accessories and original packaging. Contact support@cannafullspec.com to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping timelines, freight options, or volume order logistics: contact sales@cannafullspec.com or call our procurement line before placing large fleet orders.

What's in the Box

The following items are confirmed included with the CLOUDLAB 864D (SKU: AC-CBD864) based on manufacturer source documentation:

• CLOUDLAB 864D Dual-Chamber Grow Tent (assembled frame + canvas enclosure)
• Spill Trays — x3
• Filter Straps — x2
• Controller Plate — x1
• Controller Adhesive — x6
• Controller Screws — x4
• Wall Screws — x4
• Cable Ties — x4
• Mylar Wall (chamber divider) — x1
• Drying Rack — x1
• Product Manual (PDF, Manual Code: CL2304X1)

Lighting fixtures, inline fans, carbon filters, environmental controllers, growing containers, growing media, and irrigation hardware are not included. Frame pole assembly components (A1, A2, B, C, D1, D3, E, F, G) are included as part of the tent frame assembly. Component counts are detailed in the assembly manual (CL2304X1). Accessory list confirmed from manufacturer source data. Contact support@cannafullspec.com if any item is missing from your shipment.

Regional Compliance & Deployment Notes

• Licensing Jurisdiction: Cultivation licensing requirements, plant count limits, canopy area restrictions, and facility inspection standards vary by state and municipality across the United States. The CLOUDLAB 864D is a structural enclosure — its deployment within a licensed facility must comply with all applicable state cannabis regulations, local zoning ordinances, and building codes. Cannafull Spectrum Solutions does not provide licensing or compliance advisory services.
• Electrical Code Compliance: All electrical connections for lighting, fans, and environmental control equipment installed within or connected to the CLOUDLAB 864D must comply with the National Electrical Code (NEC) and applicable local amendments. Circuit load calculations must be performed by a licensed electrician. Do not exceed the rated capacity of any circuit supplying equipment suspended from or operating within this enclosure.
• Fire Code & Egress: Enclosed cultivation structures must be positioned in compliance with local fire code requirements for aisle clearance, egress path access, and sprinkler coverage. Verify placement with your facility's fire marshal or AHJ (Authority Having Jurisdiction) before final installation.
• State-Specific Plant Count Regulations: The manufacturer-stated capacity of 5 plants at 5-gallon container size is a structural and spatial specification, not a regulatory authorization. Actual plant counts must comply with the canopy and plant count limits established by your state's cannabis regulatory authority and your specific license tier.
• Shipping Restriction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. No shipments to Alaska, Hawaii, U.S. territories, or international addresses.

Cannafull Spectrum Solutions provides this compliance information as a general reference only. It does not constitute legal, regulatory, or engineering advice. Operators are solely responsible for verifying that their deployment of the CLOUDLAB 864D complies with all applicable federal, state, and local laws, codes, and regulations. Specifications and compliance requirements are subject to change — verify current standards with the appropriate regulatory authority before deployment.