AC Infinity Controller AI+ 8-Port Controller | 32-Device UIS

Quick Spec: SKU CTR89Q  |  8 Native Ports / 32 Devices with Splitters  |  Dual-Zone Temp + Humidity + VPD  |  Wi-Fi + Bluetooth  |  100–240V AC  |  2W Max Controller Draw  |  5.8 x 3.42 x 0.94 in.

Precision Control in Any Space

Every uncontrolled temperature swing, every humidity overshoot, every moment your equipment operates on a fixed timer while conditions drift — these are not minor inconveniences. They are compounding losses. When your fans, lights, humidifiers, and heaters operate as isolated units with no shared intelligence, your environment becomes a negotiation between devices rather than a managed system. The result is variance: inconsistent canopy conditions, unpredictable transpiration rates, and output that fluctuates cycle to cycle with no clear diagnostic path. The enemy is not any single piece of equipment — it is the absence of a unified cortex that reads, reasons, and responds to what is actually happening inside your space.

After deployment, the operational picture changes fundamentally. Your climate is no longer a manual task — it is a managed state. Temperature, humidity, and VPD are tracked continuously across two independent sensor zones, with the controller analyzing pattern data to anticipate deviations before they become spikes. Devices respond dynamically, outputting the exact percentage required to hold target conditions rather than cycling on and off at fixed thresholds. Scheduling, triggers, and min/max output levels are programmed once and retained — even through Wi-Fi interruptions — so your environment remains stable whether you are on-site or remote. The facility runs on logic, not labor.

The mechanism behind this outcome is the AI+ Cortex architecture embedded in the CTR89Q. The controller connects natively to 8 UIS ports and scales to 32 devices when splitter hubs are added — covering fans, grow lights, humidifiers, heaters, and any other UIS-compatible device in the ecosystem. The onboard sensor captures temperature and humidity directly at the unit; the corded probe extends 144 inches (12 feet) to a second zone, enabling true dual-zone atmospheric monitoring with VPD calculation derived from both readings. AI learning mode observes historical climate behavior, identifies overshoot and undershoot patterns, and recalibrates device output percentages autonomously — without operator input. Beginner mode provides full automated control based on crop type and connected device inventory; Advanced mode opens granular scheduling, trigger logic, and output customization for operators who require precise programmatic control. The controller draws a maximum of 2W, operates on 100–240V AC, and communicates via both Wi-Fi and Bluetooth for redundant connectivity. In practical terms, the Controller AI+ manages up to 32 UIS devices across dual sensor zones, operating on 2W of controller draw at 100–240V AC, with a 144-inch corded probe reach and full offline programming retention.

Where This Belongs (and Doesn't)

The Controller AI+ manages low-voltage UIS device signaling only. It does not replace dedicated electrical panels, HVAC control systems, or high-voltage switching infrastructure. All high-current device connections must be made through manufacturer-rated UIS equipment. Consult a licensed electrician before integrating into any facility with non-standard wiring configurations.

How It Works

The Controller AI+ operates as the central cortex of the UIS ecosystem. At its core, the unit houses an onboard temperature and humidity sensor that captures ambient conditions at the controller's installed location. The 144-inch (12-foot) corded probe extends sensing capability to a second zone — a canopy-level position, an intake corridor, or any critical atmospheric node within the space — enabling simultaneous dual-zone monitoring with VPD calculated from both data streams. The 4.5-inch display provides real-time readout of all active sensor values without requiring app access.

Device control is executed through 8 native UIS ports, each capable of addressing a connected device with variable output commands — not simple on/off switching. When splitter hubs are added, the addressable device count scales to 32 units across the same controller interface. Connected devices include fans, grow lights, humidifiers, heaters, and any UIS-compatible peripheral. Capacitive touch buttons provide direct on-unit programming; the AC Infinity app extends full control via Wi-Fi and Bluetooth, delivering real-time AI insights, performance scoring, alert notifications, historical climate charts, and access to an AI assistant for operational guidance.

The AI learning engine is not a static rule set. It observes the climate behavior of the specific space it is installed in, identifies the lag time and overshoot characteristics of each connected device, and recalibrates output percentages to eliminate the oscillation patterns that cause environmental spikes. This adaptive logic runs continuously, improving accuracy over successive cycles. Beginner mode automates the full control stack based on crop type and device inventory inputs; Advanced mode exposes trigger logic, timer scheduling, and min/max output boundaries for operators who require explicit programmatic control over each device channel. Offline programming retention ensures that all active schedules and trigger conditions persist through Wi-Fi disconnection events, maintaining environmental stability without operator intervention. The controller draws a maximum of 2W at 100–240V AC, operates across a temperature range of 32°F–140°F and humidity range of 35%–85% RH, and is powered via included adapter. In practical terms, the Controller AI+ delivers dual-zone atmospheric monitoring with AI-driven device output adjustment across up to 32 UIS devices, drawing 2W maximum at 100–240V AC with a 144-inch sensor probe reach.

System Integration

• UIS Ecosystem Compatibility: Connects natively to all UIS-rated AC Infinity devices — inline fans, clip fans, grow lights, humidifiers, dehumidifiers, and heaters — via the 8-port hub, expandable to 32 devices with splitter hubs (sold separately).
• AC Infinity App Integration: Full two-way control via the AC Infinity app over Wi-Fi and Bluetooth, including real-time sensor dashboards, AI insight feeds, performance scoring, alert configuration, and remote schedule management.
• Sensor Expansion Architecture: Supports up to 2 corded sensors natively; forthcoming splitter accessory (sold separately) will extend sensor port capacity. Optional CO2, hydro, and soil sensor add-ons (sold separately) will enable CO2, pH, EC, TDS, soil moisture, and water quality monitoring within the same controller interface.
• Dual-Zone Atmospheric Mapping: Onboard sensor and 144-inch corded probe provide simultaneous temperature, humidity, and VPD data from two independent spatial positions, supporting zone-differentiated device response logic.
• Outdoor Reference Monitoring: Smart outdoor monitoring tracks external climate conditions alongside internal readings, enabling intake management and environmental differential analysis.

Operator Field Notes

• Probe Placement Is Critical: The 144-inch corded probe should be positioned at canopy level or at the most thermally variable point in the space — not co-located with the controller unit. Dual-zone accuracy depends on spatial separation between the two sensor positions.
• AI Learning Requires Operational Cycles: The AI optimization engine improves with observed data. Allow a minimum of several complete environmental cycles before evaluating AI-adjusted output accuracy — early readings reflect baseline behavior, not optimized performance.
• Offline Retention Is Active by Default: Programming and scheduling persist through Wi-Fi disconnection without operator action. Verify that all active schedules are confirmed in the app before relying on offline retention during planned network maintenance windows.
• Splitter Hubs Expand Capacity — Not Included: The base unit supports 8 native UIS ports. Scaling to 32 devices requires splitter hubs, which are sold separately. Plan device counts and splitter requirements before installation to avoid mid-deployment procurement gaps.
• Future Sensor Add-Ons Are Forthcoming: CO2, pH, EC, TDS, soil moisture, and hydro quality sensor probes are planned for the platform but are not currently available. Do not purchase the CTR89Q as a CO2 or pH controller for immediate deployment — confirm sensor availability with Cannafull Spectrum Solutions before ordering for sensor-dependent applications.
• Operating Range Boundaries Are Hard Limits: The controller is rated for 32°F–140°F and 35%–85% RH. Environments that regularly approach these boundaries — high-heat rooms, near-saturation humidity spaces — should be evaluated for sensor drift and controller placement before deployment.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international destinations cannot be fulfilled at this time.
• Carrier & Transit: Orders are processed and shipped via standard carrier service. Transit times vary by destination. Tracking information is provided upon shipment confirmation. Expedited shipping options may be available at checkout.
• Returns: The Controller AI+ is eligible for return in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all included components. Defective units are handled separately under manufacturer warranty procedures — contact support before initiating a return on a unit exhibiting operational failure.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com for full support resources.

What's in the Box

The following items are confirmed included with the Controller AI+ (CTR89Q) based on manufacturer package contents documentation:

• 1x Controller AI+ Central Hub
• 1x Wireless Phone
• 1x Power Adapter
• 1x Controller Cable
• 1x Wood Screws
• 1x Drywall Anchors
• 1x Hook and Loop Fastener

Note: Splitter hubs, additional sensor probes (CO2, hydro, soil), and any future sensor expansion accessories are NOT included and must be purchased separately. Package contents are subject to change by the manufacturer without notice. Confirm current contents with Cannafull Spectrum Solutions if package completeness is operationally critical before ordering.

Regional Compliance & Deployment Notes

• Electrical Compliance: The Controller AI+ operates on 100–240V AC via included power adapter. Verify that the installation environment meets voltage and outlet requirements before deployment. The controller itself draws a maximum of 2W; connected UIS devices operate under their own electrical ratings and must be verified independently against local electrical codes.
• Licensed Facility Use: This product is sold for use in lawfully operating facilities only. Cannafull Spectrum Solutions serves licensed commercial operators across the United States. Buyers are solely responsible for ensuring that their use of this equipment complies with all applicable federal, state, and local regulations governing controlled-environment production.
• Wi-Fi Infrastructure Requirements: The Controller AI+ requires a 2.4GHz Wi-Fi network for app connectivity. Facilities with enterprise network configurations, VLAN segmentation, or MAC-filtered access points should verify IoT device compatibility with their network infrastructure before deployment.
• Operating Environment Limits: The controller is rated for operation between 32°F–140°F and 35%–85% RH. Deployment in environments that regularly approach or exceed these boundaries may affect sensor accuracy and controller reliability. Evaluate installation location against these limits before permanent mounting.
• Shipping Jurisdiction: Cannafull Spectrum Solutions fulfills orders within the contiguous 48 United States only. No shipments to Canadian provinces, U.S. territories, or international destinations.

Cannafull Spectrum Solutions is a factory-authorized dealer of AC Infinity products. Product specifications, features, and availability are subject to change by the manufacturer without notice. All compliance determinations are the sole responsibility of the purchasing operator. This product description is provided for informational purposes and does not constitute legal, electrical, or regulatory advice. Verify all specifications against current manufacturer documentation before making procurement decisions.