Lámpara LED de cultivo comercial IONFRAME EVO3 de AC Infinity, 280 W

Key Specs: 280W | 3.14 µmol/J | 2 x 4 ft. flower coverage | Samsung LM301H EVO | IP-65 | 50,000 Hr Lifespan | Effortless 2-Year Product Warranty

Kill Variance. Print Yield.

Legacy HPS infrastructure does not fail loudly — it fails incrementally, and it charges you for every hour of that decline. Lamp lumen depreciation begins the moment a bulb fires, meaning the PPFD your canopy receives on day one is never the PPFD it receives on day ninety. Passive failure points compound the problem: ballasts drift, reflectors oxidize, and manual dimming controls introduce operator-dependent inconsistency that no SOP can fully eliminate. The result is a facility running on a moving target — yield projections built on light levels that no longer exist, and a variance tax paid silently in every harvest cycle.

After deployment of the IONFRAME EVO3, the facility operates on a fixed photon budget. Every fixture in the array delivers a known, stable output. Scheduling runs on automated logic — sunrise simulation, sunset ramp, clock-based ON/OFF — without operator intervention. There are no lamp replacement windows, no mid-cycle intensity drops, and no ballast drift events. Canopy density becomes a function of cultivation protocol, not equipment inconsistency. The facility stops reacting to its infrastructure and starts executing against its production targets.

The mechanism behind that stability is the Samsung LM301H EVO diode platform — the same bin-level component used in facility-grade fixtures across licensed U.S. operations — driven at 280W across a 2 x 4 ft. flower footprint (3 x 5 ft. vegetative) with a measured efficacy of 3.14 µmol/J and a peak PPFD of 1745 µmol/m²/s. The modular driver architecture allows remote mounting to reduce in-canopy heat load, and the passive cooling design eliminates fan-based failure points entirely. Daisy-chain capacity extends to 80 fixtures per controller run, with 10 brightness levels and five controller modes — OFF, ON, SCHEDULE, SUNSET/RISE, and CLOCK — addressable through AC Infinity's Cortex ecosystem. The fixture carries IP-65 waterproof certification and ETL Certification 5021417, confirming compliance for permanent commercial installation. In practical terms, the IONFRAME EVO3 delivers 1745 µmol/m²/s across a 2 x 4 ft. flower canopy at 280W draw with a rated service life of 50,000 hours.

Where This Belongs (and Doesn't)

Not recommended for circuits under ~2.33A @120V or ~1.17A @240V per fixture, or unsealed rooms lacking HVAC capacity for expected thermal load.

Minimum infrastructure requirement: a dedicated 15A circuit (100-277V AC input range) and HVAC capacity sized for the thermal load of your full fixture array. The IONFRAME EVO3 is a passive-cooled unit; room-level atmospheric control must compensate for canopy-level heat accumulation in sealed environments.

Infrastructure Note: The IONFRAME EVO3's modular driver is designed for remote mounting, which reduces radiant heat at canopy level. However, total room BTU load must still be calculated across the full fixture count and factored into HVAC sizing before deployment. Consult your mechanical engineer for room-level thermal modeling prior to array installation.

How It Works

The IONFRAME EVO3 is built on the Samsung LM301H EVO diode platform — a high-bin, broad-spectrum emitter array that delivers photosynthetically active radiation across the full productive range required for commercial cultivation. The fixture operates at 280W across a 16.14 x 32.67 x 3.03 in. form factor, weighing 18.0 lb., and accepts input voltage from 100-277V AC, making it compatible with both standard U.S. commercial electrical infrastructure and international facility voltages without transformer modification. The diode array is driven to a measured peak PPFD of 1745 µmol/m²/s with a system efficacy of 3.14 µmol/J — a figure that reflects wall-plug-to-photon conversion efficiency across the entire fixture, not a diode-level laboratory rating.

Thermal management is entirely passive. There are no fans, no moving parts, and no fan-failure failure modes. The fixture body serves as the heat sink, dissipating thermal load through conductive and convective pathways without active intervention. This architecture eliminates the most common mechanical failure point in LED fixtures and reduces acoustic output to zero. The IP-65 waterproof rating confirms the fixture is sealed against particulate ingress and direct moisture exposure — a non-negotiable specification for high-humidity cultivation environments where condensation, irrigation overspray, and foliar application are routine operational conditions.

Control architecture is delivered through AC Infinity's UIS daisy-chain system. A single controller run can address up to 80 IONFRAME EVO3 fixtures simultaneously, with 10 discrete brightness levels and five operating modes: OFF, ON, SCHEDULE, SUNSET/RISE, and CLOCK. The SUNSET/RISE mode executes programmable sunrise and sunset transitions with a configurable duration range of 0:00 to 6:00 hours — allowing facilities to implement photoperiod ramp protocols that reduce plant stress at light-on and light-off transitions without manual operator involvement. The modular driver design supports remote mounting, physically separating the electrical driver from the fixture body to reduce in-canopy heat contribution and simplify driver-level serviceability without disturbing the fixture mount. In practical terms, the IONFRAME EVO3 delivers 1745 µmol/m²/s across a 2 x 4 ft. flower footprint at 280W with a 50,000-hour rated service life and full IP-65 environmental sealing.

System Integration

To operate this platform at peak efficiency, verify your ecosystem matches these requirements:

• Controller Compatibility: The IONFRAME EVO3 is designed for integration with AC Infinity's Cortex controller ecosystem via UIS daisy-chain. Confirm controller model supports IONFRAME Series before deployment. Up to 80 fixtures can be addressed per controller run.
• Mounting Infrastructure: Fixture dimensions are 16.14 x 32.67 x 3.03 in. at 18.0 lb. Mounting structure must be rated for the cumulative weight of the full array plus hardware. Remote driver mounting requires additional cable management planning.
• Electrical Supply: Input voltage range is 100-277V AC. Verify circuit amperage is sized for the full array draw. At 280W per fixture, calculate total array wattage and size breakers and wire gauge accordingly per NEC commercial standards.
• HVAC Capacity: Passive cooling means all fixture heat enters the room environment. Size HVAC for the full thermal load of the fixture array plus cultivation process heat. Consult your mechanical engineer for room-level BTU modeling before commissioning.
• Environmental Rating: IP-65 rated for high-humidity environments. Confirm all electrical connections and junction points maintain appropriate environmental sealing ratings consistent with the fixture's IP-65 classification.

Facility Integration Data

The following ROI model and comparison data are provided to support capital planning and infrastructure decision-making for multi-fixture deployments of the IONFRAME EVO3 (AC-IF3K) at $299.00 MAP pricing.

Operator Field Note

• Structural Load: The IONFRAME EVO3 weighs 18.0 lb. per fixture. All mounting hardware, overhead rails, and support structures must be rated for the cumulative weight of the full array. Verify load ratings with your structural engineer before installation, particularly in multi-fixture ceiling-mount configurations.
• Electrical Draw: At 280W per fixture, calculate total array amperage at your facility voltage before energizing. At 120V, a single fixture draws approximately 2.33A; at 240V, approximately 1.17A. Size circuits, breakers, and conductors per NEC Article 210 for continuous loads (125% of calculated load).
• Driver Remote Mounting: The modular driver is designed for remote mounting to reduce in-canopy heat contribution. Plan cable routing and driver mounting locations before fixture installation. Ensure driver mounting surfaces are accessible for inspection and serviceability without disturbing the fixture position.
• Daisy-Chain Architecture: When deploying arrays of more than one fixture, confirm controller model and firmware version support the full daisy-chain count before commissioning. Maximum daisy-chain capacity is 80 fixtures per controller run. Exceeding this limit may result in control instability or unaddressed fixtures.
• Environmental Setpoints: IP-65 rating confirms resistance to water jets and particulate ingress. However, all electrical connection points — including daisy-chain cables, driver connections, and power entry points — must be maintained with appropriate environmental protection consistent with the fixture's rated IP class. Inspect connection integrity at each maintenance interval.

Shipping & Logistics

• Origin: Ships from Cannafull Spectrum Solutions' authorized distribution point within the contiguous 48 United States. We do not ship to Alaska, Hawaii, or international destinations at this time.
• Processing: Orders are processed within 1-2 business days of payment confirmation. Tracking information is provided upon shipment.
• Damage: Inspect all shipments within 48 hours of delivery. Document any damage with photographs and contact Cannafull Spectrum Solutions immediately at (888) 378-0017 or sales@cannafullspec.com. Damage claims reported after 48 hours may not be eligible for resolution.
• Returns: Free and easy returns accepted within 30 days of delivery. A Return Authorization (RA) number is required prior to return shipment. Contact us to initiate the RA process before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? (888) 378-0017 or sales@cannafullspec.com

What's in the Box

• AC Infinity IONFRAME EVO3 LED Grow Light Fixture (AC-IF3K, 280W)
• Modular driver unit (designed for remote mounting)
• Hanging hardware / mounting kit
• Power cable
• UIS daisy-chain cable for controller integration

Note: Box contents are based on available manufacturer data. Verify complete contents upon receipt. Contact Cannafull Spectrum Solutions at (888) 378-0017 if any components are missing or damaged.

Regional Compliance & Deployment Notes