Tienda de cultivo avanzada AC Infinity CLOUDLAB 632 | 3 x 2 | Lona Mylar con diseño de diamante de 2000 D | 36" x 24" x 72"

Precision Control in Any Space

Every uncontrolled variable inside an enclosure is a tax on output. Thin canvas bleeds light and heat. Undersized poles flex under equipment loads, shifting fixture angles and destabilizing mounted controllers. Zipper failures break the atmospheric seal at the worst possible moment — mid-cycle, undetected, while VPD drifts and the environment you spent hours dialing in quietly collapses. The enemy is not a single failure point; it is the accumulated cost of equipment that was never built to hold a stable environment under real operational pressure. Every light leak, every flex in the frame, every compromised port seal is a variable you cannot account for and cannot correct after the fact.

After deployment, the enclosure disappears as a variable. The atmospheric boundary holds. Controllers mount cleanly on a dedicated plate with a lightproof cable passthrough, so wiring does not compromise the seal. Duct ports accept humidifiers, heaters, and A/C units without gaps. The frame carries the full equipment load without deflection. What remains is a stable, repeatable internal climate — one that responds to your inputs rather than fighting them — and a single plant operating at the ceiling of what the environment permits, cycle after cycle.

The mechanism behind that stability is structural. The CLOUDLAB 632 is built on 22mm steel poles — 4mm thicker than the 18mm standard found in most enclosures — with a verified 300 lb load capacity across the frame. The outer shell is 2000D oxford canvas with a 500G lightproof layer and front zipper flaps providing a redundant seal against light intrusion. SBS zippers run the full perimeter. Interior walls are lined with reengineered diamond-pattern mylar, lab-tested using an Agilent UV-Vis-NIR Spectrophotometer for maximum light reflectivity. The integrated controller mounting plate includes a lightproof cable passthrough and additional cinched duct ports sized for humidifiers, heaters, and A/C units. The observation window measures 11.81 x 12.59 inches — large enough for a full canopy view without breaking environmental consistency. In practical terms, the CLOUDLAB 632 delivers a 100% lightproof, structurally rigid single-chamber environment within a 35.43" x 23.62" x 70.86" footprint at a 300 lb verified load capacity.

Where This Belongs (and Doesn't)

Electrical, HVAC, and ventilation connections must be performed in accordance with applicable local codes and facility safety standards. Cannafull Spectrum Solutions does not provide installation services. Consult a licensed electrician or HVAC technician for all utility connections.

How It Works

The CLOUDLAB 632 functions as a closed atmospheric ecosystem. The outer shell — 2000D oxford canvas with a 500G lightproof layer — blocks all external light contamination and provides the primary environmental boundary. The 22mm steel pole frame, reinforced at every corner, holds the structure rigid under load and maintains dimensional stability so that mounted equipment stays positioned and sealed ports stay sealed. The frame's 300 lb load capacity accommodates the full weight of lighting, ventilation hardware, and mounted controllers without deflection.

Light management inside the enclosure is handled by the diamond-pattern mylar interior lining, which has been lab-tested with an Agilent UV-Vis-NIR Spectrophotometer to verify maximum reflectivity. Every photon that enters the canopy zone is redirected back into the plant rather than absorbed by the wall surface. The SBS zipper system runs the full perimeter with front zipper flaps providing a secondary lightproof barrier — two independent sealing layers at the highest-traffic access point.

Atmospheric control integration is handled through a dedicated port architecture. Duct openings are sized at 4" and 6" to accept standard inline fans and carbon filter configurations. Side intake holes measure 5.90 x 11.41 inches (15.0 x 29.0 cm) for passive or active air intake. Additional cinched duct ports accommodate humidifiers, heaters, and A/C units without compromising the enclosure seal. The integrated controller mounting plate — positioned with a lightproof cable passthrough — allows environmental controllers to mount externally while routing sensor cables and power lines through the wall without creating light gaps. The observation window (11.81 x 12.59 inches / 30.0 x 32.0 cm) allows full canopy inspection without opening the enclosure. The heavy-duty catch tray and detachable tool bag complete the operational setup. In practical terms, the CLOUDLAB 632 delivers a fully sealed, reflectivity-optimized single-chamber environment measuring 35.43" x 23.62" x 70.86" with a 300 lb structural load capacity and dual-layer lightproof sealing at every access point.

Commercial Assurance

• Warranty: Effortless 2-Year Product Warranty — honored through Cannafull Spectrum Solutions as a factory-authorized dealer.
• Structural Rating: 300 lb verified load capacity across the 22mm steel pole frame.
• Lightproof Standard: 100% external lightproof rating with 500G lightproof layer and redundant front zipper flap sealing.
• Material Verification: Diamond mylar interior lining lab-tested with Agilent UV-Vis-NIR Spectrophotometer for confirmed reflectivity performance.
• Zipper Standard: SBS zippers — an industry-recognized zipper specification for durability and seal integrity under repeated cycling.
• Authorized Channel: Purchased through Cannafull Spectrum Solutions, this unit is covered under the manufacturer's warranty program. Retain your order confirmation as proof of purchase.

System Integration

• Ventilation: 4" and 6" duct openings accept standard inline fans and carbon filter assemblies; additional cinched ports accommodate supplemental HVAC equipment without seal compromise.
• Environmental Control: Integrated controller mounting plate with lightproof cable passthrough supports external controller placement while maintaining full enclosure integrity.
• Lighting: Two primary hanging bars plus one extra bar provide three mounting points for fixtures; 300 lb load capacity supports full lighting and hardware configurations within the 35.43" x 23.62" footprint.
• Monitoring: 11.81 x 12.59 inch observation window enables canopy inspection and sensor verification without breaking the atmospheric seal.
• Containment: Heavy-duty catch tray manages irrigation runoff and spill events; mounting strap length of 5.51 inches (14.0 cm) accommodates standard filter and fan suspension hardware.

Facility Integration Data

The following table models operational deployment across multi-unit facility configurations, using the CLOUDLAB 632 as a standardized single-chamber atmospheric unit within a scalable controlled-environment architecture.

Fleet footprint figures are additive estimates based on individual unit dimensions (35.43" x 23.62"). Facility layout, aisle clearance, and HVAC zoning will affect actual floor plan requirements. Consult your facility engineer for load-bearing and spatial planning.

Operator Field Notes

• Pole gauge matters under load: The 22mm steel poles are 4mm thicker than the 18mm standard. Under a fully loaded configuration — fixture, fan, filter, and controller — that difference is structural, not cosmetic. Verify your total suspended weight against the 300 lb capacity before finalizing your equipment stack.
• Port selection for HVAC integration: The 4" and 6" duct openings cover standard inline fan and carbon filter pairings. If your atmospheric control setup includes a supplemental humidifier, heater, or A/C unit, route those through the additional cinched duct ports to preserve the primary duct seal geometry.
• Controller plate placement: The integrated mounting plate with lightproof cable passthrough is designed to keep environmental controllers external to the chamber. Route all sensor cables and power lines through the passthrough rather than improvising gaps at zipper seams — every improvised gap is a potential light leak and a VPD variable.
• Zipper cycling discipline: SBS zippers are rated for durability, but zipper longevity is directly tied to cycling technique. Open and close along the full track without forcing the pull at corners. The front zipper flaps provide a secondary seal layer — keep them fully engaged during all dark-period hours.
• Catch tray capacity: The heavy-duty catch tray is included and handles standard irrigation runoff. Size your irrigation volume per cycle against the tray's containment area. Overflow events in an enclosed space create humidity spikes that are difficult to correct mid-cycle.
• Observation window protocol: The 11.81 x 12.59 inch window allows canopy inspection without opening the enclosure. Use it as your primary visual check during dark periods to avoid any photoperiod interruption from zipper access.

Operator FAQ

Shipping and Logistics

• Shipping Zone: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled through this channel.
• Carrier and Transit: Standard ground shipping applies. Transit times vary by destination zone. Tracking information is provided at time of shipment.
• Returns: Free and easy returns accepted within 30 days of delivery for eligible items. Item must be in original, unassembled condition with all included components. Contact support@cannafullspec.com to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, warranty claims, or logistics inquiries: support@cannafullspec.com

What's in the Box

The following items are confirmed included with SKU AC-CBA632 based on manufacturer source data:

• x1 Grow Tent (CLOUDLAB 632, Single Chamber)
• x1 Controller Plate
• x1 Spill Tray
• x2 Filter Straps
• x6 Controller Adhesive
• x4 Controller Screws
• x4 Wall Screws
• x4 Cable Ties

Note: Contents confirmed from manufacturer product documentation. Cannafull Spectrum Solutions does not modify or repackage factory units. If any item is missing upon receipt, contact support@cannafullspec.com within 48 hours of delivery with your order number and a description of the discrepancy.

Regional Compliance and Deployment Notes

• Jurisdiction: The CLOUDLAB 632 is sold and shipped within the contiguous 48 United States only. Cannafull Spectrum Solutions does not fulfill orders to Canadian provinces, U.S. territories, or international destinations.
• Electrical Compliance: All electrical connections associated with equipment mounted within or connected to this enclosure must comply with applicable local, state, and national electrical codes. Cannafull Spectrum Solutions does not provide electrical installation services.
• HVAC and Ventilation: Duct connections, exhaust routing, and supplemental HVAC integration must comply with applicable building and mechanical codes for the facility jurisdiction. Consult a licensed HVAC technician for all utility connections.
• Facility Licensing: The operator is solely responsible for ensuring that cultivation activities conducted within this enclosure comply with all applicable state and local licensing requirements. Cannafull Spectrum Solutions makes no representations regarding the regulatory status of any cultivation operation.
• UPC: 819137021556 | SKU: AC-CBA632 | Variant: Single Chamber (Manual Code: CL2304X1)

Compliance requirements vary by state and municipality. This product description does not constitute legal, regulatory, or facility engineering advice. Operators are responsible for verifying all applicable requirements prior to deployment. Information current as of publication date; regulatory environments are subject to change.