Tubo rígido Alien Hydroponics de 22 mm y 1 metro con alimentación Venturi

Quick Spec: SKU BD101-3002  |  22mm Diameter  |  Rigid  |  Gray  |  1 Meter Length  |  Venturi Feed  |  $51.99 USD

Precision Control in Any Space

Every irrigation system has a weak point, and in most compact grow operations that weak point is the feed line itself. Flexible tubing kinks under load, shifts position between cycles, and introduces micro-variation in flow path geometry that compounds across every reservoir fill. The result is not a single catastrophic failure — it is a slow, invisible erosion of consistency. Nutrient solution reaches different sites at different pressures, different volumes, and different timing intervals. The operator adjusts. Then adjusts again. The system never stabilizes because the infrastructure was never designed to hold its position.

After integrating a dimensionally stable feed line into the irrigation architecture, the system behaves the same on day one as it does on day ninety. Feed paths hold their geometry. Venturi-assisted delivery maintains consistent draw across the line. The reservoir empties and refills on schedule, every cycle, without manual correction. The operator stops troubleshooting the plumbing and starts managing the crop.

The mechanism is straightforward: a 22mm rigid pipe body resists the positional drift and internal deformation that flexible alternatives accumulate over time. The Venturi feed configuration leverages differential pressure to drive consistent nutrient flow without requiring additional pump head, making it compatible with standard reservoir and top-feed system architectures. At 1 meter in length, the pipe provides a standardized segment that integrates directly into modular irrigation layouts, reducing custom-cut waste and simplifying system expansion. In practical terms, the ALIEN Hydroponics Pipe 22mm Rigid 1 Meter delivers Venturi-assisted top-feed irrigation across a fixed 1-meter segment at a 22mm bore diameter, priced at $51.99 USD per unit (SKU BD101-3002).

Where This Belongs (and Doesn't)

This pipe is a passive irrigation component. It does not contain electrical elements, pump mechanisms, or pressure-regulation hardware. Installation into pressurized irrigation systems should be performed by operators familiar with hydroponic plumbing standards. Verify system operating pressure and fitting compatibility before installation.

How It Works

The ALIEN Hydroponics Pipe 22mm Rigid 1 Meter operates on a passive hydraulic principle. The rigid pipe body — 22mm in diameter, 1 meter in length, gray in color — maintains a fixed internal bore geometry across the full length of the segment. Unlike flexible tubing, which can collapse, kink, or expand under varying pressure conditions, the rigid construction preserves the internal cross-section that the Venturi feed mechanism depends on to generate consistent differential pressure and draw.

The Venturi feed configuration works by creating a pressure differential within the flow path. As nutrient solution moves through the pipe, the Venturi geometry accelerates flow at a constriction point, generating a localized low-pressure zone that draws additional fluid into the stream. This eliminates the need for supplemental pump head to maintain delivery consistency across the feed line, reducing system complexity and the number of active components that can introduce failure points into the irrigation loop.

At 1 meter, each pipe segment provides a standardized unit of feed-line infrastructure. Operators building or expanding top-feed systems can calculate segment counts directly from layout dimensions, eliminating field-cut waste and ensuring that every run in the system shares identical hydraulic characteristics. The gray rigid body is visually distinct from flexible supply lines, simplifying system identification and maintenance routing during reservoir management cycles. In practical terms, the ALIEN Hydroponics Pipe 22mm Rigid 1 Meter delivers Venturi-assisted nutrient flow through a 22mm fixed-bore rigid segment, providing one standardized meter of dimensionally stable feed-line infrastructure per unit at SKU BD101-3002.

System Integration

• Top-Feed Compatibility: Integrates directly into ALIEN Hydroponics top-feed system architectures; verify fitting diameter and connection type before assembly.
• Drain-to-Waste Routing: Suitable for drain-to-waste configurations where fixed feed-line geometry reduces per-cycle variance in nutrient delivery volume and timing.
• Reservoir Pairing: Designed to work within reservoir-fed irrigation systems; confirm reservoir output pressure is within the operating range of the Venturi feed mechanism.
• Modular Expansion: Standardized 1-meter length allows operators to calculate system segment counts from layout dimensions and expand infrastructure without custom cutting.
• Fitting Verification: Confirm all upstream and downstream fittings, manifolds, and connectors are rated for 22mm rigid pipe before installation.

Operator Field Notes

• Measure twice before cutting: The 1-meter rigid length is a fixed segment. Plan your feed-line layout before ordering to confirm segment count — rigid pipe does not accommodate post-cut length adjustments the way flexible tubing does.
• Fitting tolerance matters: Rigid pipe requires precise fitting engagement. Confirm that all connectors, manifold ports, and end caps are rated and sized for 22mm rigid pipe before assembly. Loose fittings on rigid runs will leak under Venturi-generated pressure differentials.
• Orientation is fixed: Unlike flexible tubing, rigid pipe cannot be repositioned after installation without disconnecting fittings. Map your feed-line routing completely before committing to installation.
• Inspect bore on receipt: Before installation, visually confirm the internal bore is clear of manufacturing debris or transit contamination. Flush with clean water before connecting to the nutrient reservoir.
• Gray color aids system identification: The gray body distinguishes feed lines from supply, return, and drain lines in multi-line systems. Maintain color-coding discipline during system builds to simplify maintenance and troubleshooting.
• Segment standardization reduces variance: Using uniform 1-meter segments throughout a system ensures that every feed run shares identical hydraulic resistance, which supports consistent Venturi performance across all delivery points.

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Handling: Rigid pipe segments require appropriate packaging to prevent transit damage. Inspect packaging integrity upon receipt before signing for delivery. Document any damage with photographs before opening.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at cannafullspec.com — pre-sale support is available for system integration and compatibility inquiries.

What's in the Box

• 1x ALIEN Hydroponics Pipe 22mm Gray Rigid 1 Meter — Venturi Feed (SKU BD101-3002)

Box contents confirmed from available source data. Fittings, connectors, manifold hardware, and installation accessories are not included unless explicitly listed above. Verify system compatibility and required ancillary components before installation. If your order arrives incomplete or with missing components, contact Cannafull Spectrum Solutions support immediately at cannafullspec.com.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only. Cannafull Spectrum Solutions does not fulfill orders to addresses outside this jurisdiction.
• Regulatory Compliance: No electrical, emissions, or safety certification data is specified in available manufacturer source data for SKU BD101-3002. This is a passive irrigation component. Operators are responsible for confirming that installation complies with applicable local plumbing, facility, and agricultural regulations in their jurisdiction.
• Facility Suitability: Operators in licensed cultivation facilities should verify that all irrigation components, including this pipe, are approved for use under their facility's operating license and applicable state regulations before installation.
• Chemical Compatibility: Material composition is not confirmed in available source data. Operators using aggressive nutrient formulations or pH-adjustment chemicals should confirm material compatibility with the manufacturer before deployment in production systems.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. This product listing does not reference or imply compliance with Health Canada regulations or CSA certification standards.

Compliance determinations are the sole responsibility of the purchasing operator. Cannafull Spectrum Solutions provides product information as supplied by the manufacturer and does not warrant regulatory suitability for any specific jurisdiction or facility license type. Confirm all applicable requirements with your compliance officer or legal counsel before procurement.