Bomba de aire hidropónica AC Infinity | Kit de bombeo de dos salidas | 45 GPH (2,8 L/M)

Quick Spec: 4W | 110V AC | 45 GPH / 2.8 L/M | 2 Outlets | Adjustable Dial | Check Valve Included | Dimensions: 3.22 x 2.67 x 5.86 in. (8.2 x 6.8 x 14.9 cm)

Precision Control in Any Space

Uncontrolled aeration is a silent yield killer. When airflow output is fixed or unpredictable, dissolved oxygen levels swing across your reservoir — too low during peak demand, too turbulent during sensitive development windows. Single-outlet pumps with no flow adjustment force operators into a binary choice: run at full blast or not at all. Backflow events, caused by pumps with no check valve protection, introduce contamination risk and equipment damage that compounds over time. Every hour your system runs without calibrated oxygenation is an hour your root zone is operating under suboptimal conditions, and the cost of that variance accumulates invisibly across every cycle.

After deployment, the picture changes. Two independently fed outlets deliver oxygenated flow to separate zones simultaneously, eliminating the dead spots that single-outlet configurations leave behind. The adjustable dial gives operators direct, repeatable control over output intensity — dialed low for sensitive stages, pushed high when maximum dissolved oxygen is required. The check valve holds the line between pump and reservoir, ensuring one-directional flow at all times regardless of power interruptions or pressure differentials. The system runs continuously without generating disruptive noise, which means it integrates into any operating environment without requiring acoustic isolation or scheduled downtime.

The mechanism behind that reliability is an electromagnetic motor architecture that maximizes air pressure and volume output relative to its 4W power draw at 110V AC. The motor is housed in a heavy-duty shell with an internal muffler that dampens mechanical vibration at the source rather than masking it downstream. The twist-knob dial provides a continuous adjustment range from LOW to HIGH, giving operators granular control over the 45 GPH (2.8 L/M) total flow rate. Flexible air tubing routes output precisely to target zones, and the included airstone diffuses delivery for maximum surface-area oxygenation. The check valve is integrated into the tubing system, not added as an afterthought, ensuring backflow prevention is structural rather than optional. In practical terms, the AC Infinity Two-Outlet Air Pump delivers 45 GPH (2.8 L/M) of adjustable, check-valve-protected aeration across two outlets at a continuous draw of 4W on 110V AC.

Where This Belongs (and Doesn't)

This unit is a low-voltage aeration device operating at 4W / 110V AC. It does not require dedicated circuit installation or HVAC integration. Consult a licensed electrician before deploying any electrical equipment in wet or high-humidity environments. Compliance with local electrical codes is the operator's responsibility.

How It Works

The AC-AUS42 is built around an electromagnetic motor that converts 4W of power at 110V AC into sustained air pressure and volume output. Electromagnetic motor design eliminates the mechanical friction and heat buildup associated with rotary pump architectures, which is why the unit can run continuously without thermal degradation or noise escalation over time. The motor drives air through two independent outlets, each capable of being routed via flexible tubing to separate reservoir zones, diffuser stones, or aeration manifolds.

Flow output is governed by a twist-knob dial with a continuous adjustment range from LOW to HIGH. This is not a stepped selector — it is a fully variable control that allows operators to set and hold a specific output level calibrated to their system's dissolved oxygen requirements. Total flow capacity is 45 GPH (2.8 L/M), distributed across the two outlets. The included airstone diffuses output into fine bubbles, increasing the gas-liquid interface area and improving dissolved oxygen transfer efficiency at the point of delivery.

Backflow protection is provided by an integrated check valve in the tubing system. The check valve enforces one-directional airflow — from pump to reservoir — and prevents water from siphoning back into the pump body during power interruptions or pressure reversals. This protection is structural to the tubing assembly, not a field-added accessory. The heavy-duty outer shell and internal muffler work together to dampen motor vibration and airflow noise, enabling continuous operation in noise-sensitive environments without acoustic treatment. In practical terms, the AC-AUS42 delivers 45 GPH (2.8 L/M) of continuously adjustable, backflow-protected aeration across two outlets at 4W / 110V AC, housed in a unit measuring 3.22 x 2.67 x 5.86 in. (8.2 x 6.8 x 14.9 cm).

Commercial Assurance

System Integration

• Reservoir Oxygenation: Route each outlet to a separate reservoir zone or diffuser stone to maintain uniform dissolved oxygen levels across the full water volume.
• Aquaponic Loop Integration: Connect to aeration points within recirculating aquaponic systems where consistent oxygen delivery to both plant root zones and aquatic life is required simultaneously.
• Irrigation Holding Tanks: Deploy in pre-irrigation holding tanks to maintain dissolved oxygen in nutrient solution prior to delivery, reducing anaerobic conditions at the root zone.
• Multi-Zone Manifold Expansion: Use the two outlets as primary feeds into a distribution manifold to extend coverage beyond two zones without adding additional pump units.
• Continuous-Run Scheduling: The electromagnetic motor is rated for continuous operation — integrate into automated timer or controller systems for scheduled aeration cycles without manual intervention.

Facility Integration Data

The following table models cumulative electrical load and procurement cost for multi-unit deployments of the AC-AUS42 across scaled facility configurations. These figures are based on published specifications (4W per unit, $23.99 MAP per unit) and are provided for operational planning purposes only. Actual energy costs will vary based on local utility rates and run-time schedules.

Operator Field Notes

• Dial Calibration: Set the twist-knob dial before connecting tubing to your reservoir. Establish your baseline flow rate in open air, then connect — this prevents over-pressurizing diffuser stones during initial startup.
• Check Valve Orientation: The check valve in the tubing assembly is directional. Confirm arrow orientation matches airflow direction (pump to reservoir) before sealing connections. Reversed installation defeats backflow protection.
• Continuous-Run Suitability: The electromagnetic motor is designed for uninterrupted operation. Running the unit on a timer is operationally valid, but the motor does not require rest cycles — continuous deployment is within design parameters.
• Tubing Routing: Flexible air tubing allows routing around obstructions and through tight enclosures. Avoid sharp bends that restrict internal diameter — maintain a minimum bend radius to preserve rated flow output.
• Airstone Maintenance: Diffuser stones accumulate mineral deposits over time in hard-water systems. Inspect and replace airstones on a scheduled basis to maintain rated dissolved oxygen transfer efficiency.
• Outlet Load Balancing: When running both outlets simultaneously, distribute tubing lengths as evenly as practical. Significant length disparity between the two outlet runs will create unequal flow distribution across zones.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled through this listing.
• Processing Time: Orders are processed and submitted to the fulfillment channel within 1-2 business days of payment confirmation. Carrier transit times apply after processing.
• Returns: Returns are accepted for new, unopened units in original manufacturer packaging. Contact Cannafull Spectrum Solutions within the applicable return window to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, order status, or returns? Contact Cannafull Spectrum Solutions directly through the store contact page before initiating any return or dispute.

What's in the Box

• AC Infinity Hydroponics Air Pump, Two-Outlet Pumping Kit (SKU: AC-AUS42) — 1x unit
• Flexible air tubing — included as part of the pumping kit
• Airstone — included for diffused aeration delivery
• Check valve — integrated into tubing assembly for one-way backflow protection

Note: Box contents are confirmed based on available manufacturer source data for SKU AC-AUS42. Cannafull Spectrum Solutions does not modify, repackage, or substitute manufacturer kit contents. If your shipment is missing any listed component, contact us immediately before use. Accessory items such as additional tubing lengths, manifolds, or replacement airstones are not included unless explicitly listed above.

Regional Compliance & Deployment Notes

• Electrical Code Compliance: The AC-AUS42 operates at 110V AC / 4W. Deployment in wet or high-humidity environments must comply with applicable local and national electrical codes (NEC and local AHJ requirements). Consult a licensed electrician if installation involves permanent wiring, enclosed wet spaces, or proximity to standing water.
• State-Level Agricultural & Water Use Regulations: Operators deploying this unit in licensed production facilities should confirm that their aeration and water management practices comply with applicable state-level agricultural, water use, and environmental regulations. Requirements vary by jurisdiction.
• Licensed Facility Deployment: This product is deployed in licensed commercial production facilities across the United States. Operators are responsible for ensuring all equipment use aligns with the terms of their facility's operating license and any applicable state agency oversight requirements.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. This listing is valid for the contiguous 48 United States only.
• UPC Reference: UPC 819137023703 — for procurement, compliance documentation, and facility asset tracking purposes.

Compliance information provided here is for general operational guidance only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions makes no representations regarding the suitability of this product for any specific licensed use case. Operators are solely responsible for verifying compliance with all applicable federal, state, and local regulations prior to deployment.