Recipientes de tela reutilizables de alta resistencia AC Infinity | 10 galones | Paquete de 5

Quick Spec: SKU AC-PFP10 | 10 Gallon Nominal / 11.11 Gallon True Capacity | H: 12 in. (30.5 cm) / D: 16.5 in. (41.9 cm) | 500G Nonwoven Fabric | Steel Rings | Nylon Handles | BPA-Free | Machine-Washable | 2-Year Warranty | 5-Pack

Precision Control in Any Space

Every production cycle that runs through a container with compromised drainage, circling roots, or inconsistent soil-to-root contact is a cycle where the operator has already lost control — before a single environmental variable is adjusted. Rigid plastic walls trap heat, block oxygen exchange, and force roots into circular patterns that reduce the effective absorptive surface area of the root system. Thin-wall fabric pots collapse under load, degrade after a single wash cycle, and offer no integrated hardware for canopy management. The result is variance that compounds across every run: uneven uptake, inconsistent canopy density, and containers that cannot be reliably reused without introducing new variables into the next cycle. Guesswork and equipment that fights you do not announce themselves — they show up in yield data after the fact.

After deployment, the production floor operates from a stable foundation. Each container delivers a consistent root-zone environment: air-pruned root tips that branch laterally and build dense, even coverage of the soil column, maximizing water and nutrient absorption at every irrigation event. Passive permeability through the fabric wall eliminates overwatering as a variable, and the thermal properties of the nonwoven material buffer the root zone against ambient temperature swings without active intervention. Canopy management integrates directly into the container hardware — no retrofitting, no external anchors, no modifications between runs. Containers come out of the wash cycle in the same structural condition they went in, ready for the next deployment without re-procurement cost.

The mechanism behind this consistency is the 500G nonwoven fabric construction — a material weight that provides structural integrity under full soil load while maintaining the air permeability required for passive root pruning. When a root tip reaches the fabric wall, oxygen exposure causes it to desiccate and branch, redirecting growth energy into lateral root development rather than circular elongation. The result is a root architecture with greater surface area and more uniform soil contact. True capacity is 11.11 gallons — measured to the dual stitch line — which exceeds the nominal 10-gallon rating and ensures operators are not under-filling containers relative to plant demand. Structural durability is reinforced through nylon handles rated for repeated lifting under full load and reinforced stitching at all stress points. The integrated steel rings at the container rim accept twist ties directly, enabling low-stress training routes to be established and adjusted without any modification to the container. BPA-free material certification confirms the fabric is safe for food-crop and regulated-crop production environments. In practical terms, the AC-PFP10 delivers 11.11 gallons of true root-zone volume in a 12 in. (30.5 cm) tall by 16.5 in. (41.9 cm) diameter footprint, backed by a 2-year warranty across a 5-unit pack at $28.99.

Where This Belongs (and Doesn't)

The AC-PFP10 is a passive cultivation container. It does not require electrical connection, plumbing integration, or environmental control pairing to function. Operators integrating these containers into automated irrigation or fertigation systems should verify emitter placement relative to the container's permeable wall to prevent channeling. No licensed contractor requirement applies to container deployment.

How It Works

Air Pruning Mechanism: The 500G nonwoven fabric wall is permeable to both air and water. When a root tip reaches the interior surface of the fabric, the ambient oxygen concentration at the wall interface is sufficient to desiccate the root tip — a process called air pruning. The pruned tip ceases elongation and the plant redirects growth energy into lateral branching from the pruned node. Repeated across the full interior surface of the container, this process produces a root architecture characterized by dense, even lateral coverage of the soil column rather than a single circling taproot. Even soil coverage translates directly to more uniform water and nutrient uptake at each irrigation event, reducing the within-container variance that drives inconsistent canopy development.

Drainage and Permeability: The same fabric permeability that enables air pruning also functions as a passive drainage system. Excess water migrates through the fabric wall by gravity and capillary action, preventing the saturation conditions that restrict oxygen availability in the root zone. Operators running automated irrigation schedules benefit from a container that self-corrects for over-application without requiring manual intervention or drainage hardware modifications.

Thermal Buffering: The nonwoven fabric construction provides passive insulation at the container wall, moderating the rate of heat transfer between the ambient environment and the root zone. In environments with variable ambient temperature — outdoor beds, uninsulated structures, or facilities with HVAC cycling — this thermal buffering preserves root-zone stability without active heating or cooling at the container level.

Structural and Training Hardware: The container is constructed with nylon handles at the rim for load-bearing transport under full soil weight, and reinforced stitching at all high-stress seam points to maintain structural integrity across repeated wash and deployment cycles. Steel rings integrated into the rim accept twist ties directly, providing fixed anchor points for low-stress training routes without requiring any modification to the container or the use of external hardware. The dual stitch line on the interior wall serves as a fill indicator: soil filled to this line yields the true capacity of 11.11 gallons, which exceeds the nominal 10-gallon rating and ensures operators are calibrating feed volumes to actual container volume rather than nominal labeling. In practical terms, the AC-PFP10 delivers a 12 in. (30.5 cm) tall by 16.5 in. (41.9 cm) diameter root-zone environment with integrated training hardware, passive drainage, and air-pruning architecture across a 5-unit pack backed by a 2-year warranty.

System Integration

• Automated Irrigation Compatibility: The permeable fabric wall is compatible with drip emitter and top-feed irrigation systems; position emitters toward the center of the container surface to prevent preferential drainage channeling at the wall interface.
• Fertigation Calibration: Feed volumes should be calculated against the true capacity of 11.11 gallons (not the nominal 10-gallon rating) to maintain accurate nutrient concentration targets at the root zone.
• Canopy Management Integration: Steel rim rings accept standard twist ties, enabling low-stress training routes to be established and adjusted at any point in the production cycle without container modification or external anchor hardware.
• Rack and Bench Compatibility: The 16.5 in. (41.9 cm) diameter footprint should be verified against bench or rack spacing before deployment in high-density configurations.
• Wash and Redeployment Protocol: Machine-washable construction supports between-cycle sanitation; allow full drying before redeployment to prevent residual moisture from affecting the next cycle's root-zone baseline.

Facility Integration Data

The following table models per-unit and fleet-level cost across 10, 20, and 50-unit deployments at the $28.99 MAP price per 5-pack, with per-container cost calculated from the 5-pack unit price.

Operator Field Note

• Fill to the Dual Stitch Line: The true capacity of 11.11 gallons is achieved when soil is filled to the dual stitch line on the interior wall — not to the rim. Calibrate feed volumes and substrate quantities to 11.11 gallons, not the nominal 10-gallon label, to maintain accurate nutrient concentration targets.
• Wash Protocol Between Cycles: Machine-wash with a non-residue detergent and allow full air-drying before redeployment. Residual moisture in the fabric wall at the start of a new cycle can skew early-stage root-zone moisture readings and affect irrigation scheduling accuracy.
• Steel Ring Utilization: The integrated steel rings are positioned for twist-tie passthrough — use them to establish low-stress training routes early in the vegetative stage before canopy structure becomes rigid. No additional hardware or container modification is required.
• Drainage Surface Requirement: Because the fabric wall is permeable on all sides and the base, position containers on a surface that allows free drainage — elevated benches, slatted trays, or drainage mats. Placing containers directly on impermeable flat surfaces will restrict base drainage and partially negate the permeability advantage.
• Handle Load Rating: Nylon handles are rated for transport under full soil load. When moving containers at full capacity, use both handles and avoid single-handle lifts on containers exceeding 50% soil fill to prevent seam stress at the handle attachment points.
• BPA-Free Documentation: The BPA-free material designation is available for inclusion in facility compliance documentation. Retain purchase records and product specification sheets for regulatory file maintenance.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled through this channel.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times are provided at checkout based on destination zip code. Cannafull Spectrum Solutions does not guarantee carrier transit times once a shipment is in carrier custody.
• Returns: Returns are accepted within 30 days of delivery for items in original, undeployed condition. Defective units are subject to manufacturer warranty claim procedures. Contact support@cannafullspec.com to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, volume pricing, or compliance documentation requests, contact Cannafull Spectrum Solutions at support@cannafullspec.com.

What's in the Box

• 5x AC Infinity Heavy Duty Reusable Fabric Pots, 10 Gallon (SKU: AC-PFP10)
• Each pot: 500G nonwoven fabric body with integrated steel rim rings and nylon handles
• Dual stitch line fill indicator on interior wall of each pot
• Reinforced stitching at all seam and handle attachment points on each pot

Box contents confirmed from manufacturer source data for SKU AC-PFP10. No accessories, training hardware, or supplemental materials are listed in source data as included. Verify pack contents upon receipt and contact Cannafull Spectrum Solutions immediately if the delivered quantity does not match the 5-pack specification.

Regional Compliance & Deployment Notes

• BPA-Free Certification: The nonwoven fabric used in the AC-PFP10 is BPA-free. This designation supports compliance documentation for licensed cultivation facilities operating under state-level regulatory frameworks that require material safety disclosure for containers used in regulated-crop production.
• Food-Crop Suitability: The BPA-free material certification confirms the AC-PFP10 is safe for use with vegetable and other food crops, supporting multi-use deployment across diversified production programs.
• No Electrical or Plumbing Permit Requirement: The AC-PFP10 is a passive container with no electrical, plumbing, or mechanical components. No licensed contractor or permit is required for deployment in any U.S. jurisdiction.
• Shipping Jurisdiction: Available for deployment in licensed commercial facilities across the contiguous 48 United States. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations.
• Warranty Jurisdiction: The 2-year manufacturer warranty applies to units purchased through authorized dealer channels within the United States. Retain proof of purchase for warranty claim initiation.

Compliance applicability varies by state and local jurisdiction. Operators are responsible for verifying that container materials and production practices meet the specific requirements of their licensed facility's regulatory framework. The BPA-free designation and material specifications provided here are sourced from manufacturer data for SKU AC-PFP10 and are accurate as of the publication date of this product page. Cannafull Spectrum Solutions does not provide legal or regulatory compliance advice. Consult your facility's compliance officer or legal counsel for jurisdiction-specific guidance.