Tendedero colgante para hierbas AC Infinity | Diámetro de 24 pulgadas | Cuatro niveles

Quick Spec: SKU: AC-DRA64  |  Diameter: 23.62" (60.0 cm)  |  Length: 31" (78.7 cm)  |  Tiers: 4 Chambers  |  Chamber Height: 6.75"  |  Mesh: Non-toxic polyester  |  Frame: Flexible steel wireframe  |  Collapsible: Yes  |  UPC: 819137022034

Four Tiers. One Footprint. Zero Wasted Space.

Every post-harvest operation runs against the same silent adversary: space that disappears the moment yield increases. Flat racks fill floor area faster than they fill capacity. Improvised hanging lines create uneven airflow pockets that dry the outer layer while the interior retains moisture — producing inconsistent results that undermine weeks of cultivation discipline. Single-tier solutions force operators to choose between throughput and space, and that tradeoff compounds across every harvest cycle. The equipment itself becomes the bottleneck, not the process.

After deployment, the drying station operates as a vertical column rather than a horizontal sprawl. Four independent chambers stack within a 31-inch hanging length, each presenting a full 23.62-inch diameter mesh surface to ambient airflow. Material is distributed across tiers, not compressed onto a single plane — which means airflow reaches every layer without manual repositioning or rotation. The footprint on the floor is zero. The rack hangs, the air moves, and the drying cycle runs without intervention.

The structural mechanism is a flexible steel wireframe enveloped by non-toxic polyester mesh — a construction that holds each of the four chambers open under load while remaining fully collapsible when the cycle ends. Each chamber provides 6.75 inches of vertical clearance, accommodating dense flower clusters and branched material without compression. The built-in Velcro loop eliminates the need for additional hardware, allowing the rack to hang from tent crossbars, closet rods, or overhead rigging points without modification. In practical terms, the AC Infinity Drying Rack 64 delivers four independent 23.62-inch drying chambers within a 31-inch vertical hang length, collapsing flat for storage between cycles.

Where This Belongs (and Doesn't)

The AC-DRA64 is a passive drying and curing tool. It does not generate, regulate, or control temperature, humidity, or airflow. Effective drying outcomes depend on the ambient environmental conditions of the deployment space. Operators running controlled drying protocols should pair this rack with a calibrated atmospheric control system to maintain target vapor pressure deficit (VPD) and temperature ranges throughout the drying cycle.

How It Works

The AC-DRA64 operates on a straightforward structural principle: vertical stacking of independent mesh chambers within a single hanging column. The flexible steel wireframe provides the structural backbone for each of the four tiers, holding the 23.62-inch (60.0 cm) diameter mesh surface open and level under the weight of drying material. The non-toxic polyester mesh allows air to pass through the chamber floor and walls, creating passive multi-directional airflow exposure across the material surface — a condition that flat solid-surface racks cannot replicate.

Each of the four chambers provides 6.75 inches of interior vertical clearance, which accommodates dense flower clusters, branched stems, and bulkier botanical material without forcing compression against the mesh ceiling. The total hanging length of 31 inches (78.7 cm) means the fully loaded rack fits within standard grow tent heights and most closet configurations without modification. The built-in Velcro loop at the top of the assembly attaches directly to tent crossbars, closet rods, or fixed overhead anchor points — no carabiners, S-hooks, or additional rigging hardware required. When the drying cycle is complete, the wireframe collapses flat, reducing the rack to a compact form for storage or transport between facilities or harvest cycles. In practical terms, the AC Infinity Drying Rack 64 provides four 23.62-inch mesh drying chambers within a 31-inch hanging column, collapsing to a flat profile for storage between cycles with no tools required.

Commercial Assurance

System Integration

• Atmospheric Control Pairing: For consistent drying outcomes, deploy the AC-DRA64 within an environment managed by a calibrated temperature and humidity controller — maintaining target VPD ranges throughout the drying cycle prevents uneven moisture loss across tiers.
• Airflow Integration: Position the rack within the circulation path of an inline or oscillating fan system to ensure passive airflow reaches all four chamber levels; avoid direct high-velocity impingement on the mesh surface, which can cause uneven surface drying.
• Vertical Stacking: Multiple AC-DRA64 units can be deployed in parallel within the same tent or drying room, each hanging from independent anchor points, to scale throughput without expanding floor footprint.
• Storage Protocol: The collapsible wireframe design allows units to be flattened and stacked between harvest cycles, reducing storage volume and enabling rapid redeployment at the start of the next cycle.
• Sanitation Compatibility: The non-toxic polyester mesh surface is compatible with standard facility cleaning protocols between cycles; confirm solvent compatibility with AC Infinity before applying chemical sanitizers.

Facility Integration Data

The following table provides fleet-scale reference data for operators deploying multiple AC-DRA64 units across a single facility or across multiple drying stations — use these figures for procurement planning, spatial allocation, and throughput modeling.

Operator Field Notes

• Tier Loading: Distribute material evenly across all four chambers rather than loading from the top down — uneven weight distribution can cause the wireframe to hang at an angle, reducing airflow uniformity across the lower tiers.
• Anchor Point Verification: The built-in Velcro loop is rated for the rack's operational load; verify that the overhead anchor point (tent crossbar, closet rod, ceiling hook) can support the combined weight of the rack and loaded material before hanging.
• Chamber Clearance: The 6.75-inch chamber height accommodates most dense flower clusters; for oversized material, consider trimming stems to fit within the chamber without pressing against the mesh ceiling, which can restrict airflow to the contact surface.
• Collapse and Storage: Collapse the wireframe fully before stacking units for storage — partial collapse can stress the frame joints over repeated cycles. Store flat in a dry location away from direct UV exposure to extend mesh service life.
• Velcro Maintenance: Inspect the Velcro loop after each cycle for debris accumulation (plant material, trichomes) that can reduce grip strength. Clean with a stiff brush before redeployment.
• Multi-Unit Spacing: When hanging multiple units in the same space, maintain a minimum lateral clearance between racks to prevent mesh surfaces from contacting each other under load, which would restrict airflow to the adjacent chamber walls.

Operator FAQ

Shipping & Logistics

• Fulfillment Region: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and all international destinations including Canada are not fulfilled through this listing.
• Shipping Method: Standard ground shipping applies to all AC-DRA64 orders. Expedited shipping options, where available, will be presented at checkout. Delivery timelines are carrier-dependent and are not guaranteed by Cannafull Spectrum Solutions.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with factory packaging intact. Defective units are handled separately under manufacturer warranty procedures. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com for pre-purchase support.

What's in the Box

• 1x AC Infinity Drying Rack 64 (AC-DRA64) — four-tier collapsible mesh drying rack, 23.62" diameter, 31" hang length

Box contents are based on manufacturer specifications available at the time of listing. Cannafull Spectrum Solutions confirms only items explicitly identified in manufacturer source data. If your shipment is missing any component, contact support@cannafullspec.com within 48 hours of delivery with your order number and a photograph of the received contents.

Regional Compliance & Deployment Notes

• Jurisdiction: The AC-DRA64 is sold and shipped within the contiguous 48 United States only. Cannafull Spectrum Solutions does not fulfill orders to Canadian provinces, U.S. territories, or international destinations.
• Regulatory Use Context: The AC-DRA64 is a passive mechanical drying tool. It does not generate electrical load, emit light, or interface with environmental control systems. No electrical permits, HVAC certifications, or facility licensing modifications are required for deployment of this product as a standalone unit.
• Facility Compliance: Operators deploying this rack within a licensed cultivation or processing facility are responsible for ensuring that post-harvest drying protocols — including temperature, humidity, and airflow parameters — comply with applicable state and local regulations governing the handling of plant material. The rack itself does not create or modify any compliance obligation.
• Material Safety: The mesh material is designated non-toxic by the manufacturer, AC Infinity Inc. Operators with specific material safety requirements (food-grade, pharmaceutical, or regulated botanical processing) should request a material safety data sheet (MSDS) directly from AC Infinity prior to deployment in regulated processing environments.

Compliance requirements vary by state, county, and facility license type. The information provided in this section is for general reference only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions makes no representation regarding the suitability of this product for any specific licensed use case. Operators are responsible for verifying compliance with all applicable regulations in their jurisdiction prior to deployment.