Tendedero colgante para hierbas AC Infinity | 18 pulgadas de diámetro | Dos niveles

Quick Spec: SKU: AC-DRA42  |  Diameter: 18" (45.7 cm)  |  Length: 16" (40.5 cm)  |  Tiers: 2  |  Chamber Height: 6.75"  |  Mesh: Non-toxic Polyester  |  Frame: Flexible Steel Wireframe  |  Collapsible: Yes  |  UPC: 819137022010

Precision Control in Any Space

Every post-harvest operation carries a silent cost that rarely appears on a loss report: the slow degradation of material quality caused by uncontrolled drying conditions. When harvested flowers, buds, and seeds are laid out on flat surfaces or suspended without chamber separation, airflow becomes uneven, moisture migrates unpredictably, and the operator loses the ability to manage the environment around the material. The result is inconsistent moisture loss across the batch — some material overdries while adjacent product retains excess humidity — and there is no mechanism to intervene without physically repositioning the entire load. That guesswork compounds across every cycle, and the equipment that enables it offers no path to correction.

After deployment, the post-harvest station operates differently. Material is distributed across two independent chambers, each maintaining its own microenvironment within a defined 6.75-inch vertical zone. The operator hangs the rack, loads each tier, zips the chambers closed, and the drying process proceeds without manual repositioning or improvised airflow management. When the cycle is complete, the rack collapses flat for storage or relocation. The footprint consumed during drying is recovered immediately afterward, and the same unit is ready for the next run without any reconfiguration overhead.

The mechanism behind this operational consistency is straightforward: a flexible steel wireframe maintains the 18-inch (45.7 cm) circular form under load while remaining fully collapsible when unloaded, and the non-toxic polyester mesh envelope allows passive airflow to move through the chamber walls without creating dead zones at the material surface. Two independent zippered chambers — each 6.75 inches in height — provide physical separation between drying loads, preventing cross-contamination of moisture and allowing the operator to stage different material types or harvest batches simultaneously within a single 16-inch (40.5 cm) vertical stack. The built-in Velcro loop eliminates the need for auxiliary hooks or rigging hardware, enabling placement on tent crossbars, closet rods, or overhead structures without additional tooling. In practical terms, the AC Infinity Drying Rack 42 delivers two-chamber separated drying across an 18-inch diameter footprint within a 16-inch collapsed-ready vertical profile, mountable without supplemental hardware via integrated Velcro loop.

Where This Belongs (and Doesn't)

The AC-DRA42 is a passive drying and curing tool. It does not generate, regulate, or monitor temperature, humidity, or airflow. Environmental control within the deployment space remains the responsibility of the operator's climate management infrastructure. This unit does not replace active dehumidification, HVAC, or atmospheric control systems.

How It Works

The AC-DRA42 frame is constructed from flexible steel wireframe that holds a consistent 18-inch (45.7 cm) circular diameter under the weight of loaded plant material. The wireframe is fully enveloped in non-toxic polyester mesh, which serves two simultaneous functions: it provides the load-bearing surface for material placement and allows passive airflow to circulate through the chamber walls from all radial directions. This circumferential airflow access is what distinguishes a mesh chamber from a solid-surface tray — moisture vapor is not trapped against the material surface but is continuously displaced by ambient air movement through the mesh weave.

The two-tier chamber architecture divides the 16-inch (40.5 cm) total vertical profile into two independent 6.75-inch zones, each accessed and sealed via a dedicated zipper closure. Zipping a chamber closed does not block airflow through the mesh walls — it prevents material from shifting or falling during handling and provides a degree of separation between the microenvironments of each tier. Operators can load different material types, different harvest dates, or different moisture-content batches into each chamber and manage them independently without cross-contamination of drying conditions.

Mounting is accomplished through a built-in Velcro loop integrated into the top of the frame. The loop is designed to engage directly with tent crossbars, closet rods, dowels, or any horizontal structure within its diameter range, eliminating the need for S-hooks, carabiners, or supplemental rigging hardware. When the drying cycle is complete, the flexible steel wireframe allows the entire unit to be collapsed flat — compressing the full 16-inch vertical profile to a fraction of its operational depth — for storage in a drawer, bag, or shelf without disassembly. In practical terms, the AC Infinity Drying Rack 42 provides two independently zippered 6.75-inch drying chambers within an 18-inch diameter polyester mesh frame, collapsible to flat storage and mountable without auxiliary hardware via integrated Velcro loop.

System Integration

• Climate Infrastructure Pairing: Deploy within spaces managed by active dehumidification and atmospheric control systems to maximize drying consistency; the rack itself is passive and performs in proportion to the ambient environment the operator maintains.
• Vertical Stacking: Multiple AC-DRA42 units can be hung in vertical sequence on the same mounting point where ceiling height and structural load permit, increasing total drying capacity without expanding horizontal footprint.
• Tent Ecosystem Compatibility: The 18-inch diameter and Velcro loop mounting are dimensionally compatible with standard grow tent crossbar configurations; verify crossbar diameter against Velcro loop clearance before deployment.
• Post-Harvest Workflow: Position the rack as the terminal stage of the harvest workflow — after trimming and before long-term curing vessel transfer — to standardize the moisture reduction phase across all batches.
• Storage Protocol: Collapse flat after each cycle and store in a dry location; the flexible wireframe does not require a rigid storage container and can be filed vertically in a standard storage rack or drawer system.

Facility Integration Data

The following table provides fleet-scale unit economics for operators evaluating multi-unit deployment of the AC-DRA42 at MAP pricing of $16.99 per unit.

Operator Field Notes

• Chamber Loading: Distribute material evenly across the full 18-inch mesh surface of each chamber to prevent localized moisture pooling; avoid stacking material more than one layer deep to maintain airflow through the mesh floor.
• Zipper Maintenance: After each cycle, clear any dried plant debris from the zipper track before closing; mesh debris in the zipper mechanism is the primary cause of premature zipper wear on mesh drying racks.
• Mounting Tension: The Velcro loop is designed for horizontal rod or bar engagement; verify that the mounting point is level before loading to prevent uneven material distribution across the chamber floor.
• Collapse Protocol: Collapse the rack only after material has been fully removed; collapsing with residual plant matter inside the chambers can transfer terpene and resin residue to the mesh weave and degrade airflow performance over time.
• Ambient Environment: The rack performs as a passive surface; drying rate and uniformity are directly determined by the temperature, relative humidity, and airflow velocity of the surrounding space — not by the rack itself.
• Multi-Rack Spacing: When hanging multiple units in vertical sequence, maintain a minimum clearance between the bottom of one rack and the top of the next to allow lateral airflow between tiers; contact between stacked racks restricts circumferential airflow and extends drying time.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized distribution. Estimated lead times are provided at checkout and are subject to carrier availability and regional logistics conditions.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with original packaging. Defective units are subject to manufacturer warranty review.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, volume inquiries, or pre-purchase technical questions, contact Cannafull Spectrum Solutions directly through cannafullspec.com.

What's in the Box

• 1 × AC Infinity Drying Rack 42 (AC-DRA42) — 18" diameter, 2-tier collapsible mesh drying rack with integrated Velcro loop

Note: No supplemental mounting hardware, hooks, or accessories are confirmed as included in the source data. The built-in Velcro loop is the sole mounting mechanism. If additional accessories are required for your specific installation, source them separately. Contents confirmed against manufacturer source data only — verify final box contents upon receipt and contact Cannafull Spectrum Solutions immediately if any discrepancy is identified.

Regional Compliance & Deployment Notes

• Jurisdiction: The AC-DRA42 is available for sale and shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions.
• Regulatory Applicability: This product is a passive mechanical drying rack. It does not generate electrical load, emit radiation, or interface with building electrical or HVAC systems. No electrical permits, circuit ratings, or emissions certifications are applicable to this unit.
• Facility Compliance: Operators are solely responsible for ensuring that post-harvest drying and curing practices, including the use of this rack, comply with all applicable state, county, and municipal regulations governing licensed cultivation and processing facilities in their jurisdiction.
• Material Contact Standards: Operators subject to state-level product safety or food-contact material regulations should verify that the non-toxic polyester mesh specification meets applicable standards in their jurisdiction prior to deployment in a licensed processing environment.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. This listing does not reference or imply compliance with Health Canada regulations or CSA certification standards.

Product specifications, pricing, and availability are subject to change without notice. All data presented on this page is sourced from manufacturer-provided documentation current at time of publication. Cannafull Spectrum Solutions makes no independent performance claims beyond those stated in manufacturer source data. Verify all specifications with AC Infinity Inc. for the most current product documentation.