Red de enrejado para carpa de cultivo AC Infinity | Cordones elásticos flexibles | 3 x 3 pies

Precision Control in Any Space

Every enclosed cultivation environment has a ceiling on what it can produce — and most operators never reach it, not because of light or nutrients, but because canopy management is left to guesswork. Without a reliable structural layer between your plants and your light source, lateral growth goes undirected, stems compete for vertical space, and the operator spends labor hours manually repositioning, tying, and retying growth that should have been guided from the start. The silent cost is not just uneven canopy density — it is the compounding loss of harvestable sites that never developed because the structure to support them was never in place. Rigid netting compounds the problem: it cannot flex with the plant, it abrades stems under load, and it locks the operator into a fixed geometry that rarely matches actual plant behavior across a full production cycle.

After deployment, the environment changes character. The canopy fills the available footprint evenly, with each lateral branch guided into its own cell and held there without mechanical stress on the stem. Height adjustments happen at the frame level without removing the net or disturbing established growth. Pruning and picking access is preserved through every cell opening, reducing the labor time required per plant and allowing the operator to move through the canopy systematically rather than reactively. The net becomes a passive structural layer that does its work continuously without requiring operator intervention between adjustments.

The mechanism behind that outcome is the interweaving elastic polyester construction. Elastic rubber cords shrouded in high-quality polyester form each cord segment, giving the net the tensile compliance to stretch from its non-stretched state of 28.35 x 28.35 in. (72 x 72 cm) to a fully deployed footprint of 3 x 3 ft. (91.4 x 91.4 cm) across 81 individual cells. The interweave pattern distributes load across the entire net rather than concentrating stress at any single node, which is what allows the net to bear heavy fruiting and flowering weight without deforming or cutting into plant tissue. Four-corner steel hooks secure the net to the grow tent frame and allow height repositioning without full disassembly. In practical terms, the AC-ETB33 delivers 81-cell elastic canopy support across a 3 x 3 ft. footprint with a non-stretched resting dimension of 72 x 72 cm and a 2-year manufacturer warranty.

Where This Belongs (and Doesn't)

The AC-ETB33 is a passive structural component. It does not replace environmental controls, lighting infrastructure, or irrigation management. Installation should be performed with the grow tent frame fully assembled and stable before net deployment.

How It Works

The AC-ETB33 operates on a single structural principle: elastic compliance distributed uniformly across a defined canopy footprint. The net is constructed from elastic rubber cords shrouded in high-quality polyester using an interweaving pattern that creates 81 individual cells across the deployed surface. Each cell functions as an independent support point, allowing the operator to guide individual stems or branches into position without the adjacent cells being affected. The interweave geometry means that as any single cord segment stretches under plant load, the tension is redistributed laterally across neighboring segments rather than concentrating at a single junction — this is the mechanism that prevents cell deformation and stem abrasion under heavy fruiting weight.

The non-stretched resting state of 28.35 x 28.35 in. (72 x 72 cm) allows the net to be stored compactly and redeployed across multiple production cycles. When installed, the net stretches to its full 3 x 3 ft. (91.4 x 91.4 cm) operational footprint, with the elastic tension providing passive resistance that holds plant stems in lateral position without mechanical fasteners. The four-corner steel hooks engage directly with the grow tent's steel frame crossbars, providing a secure anchor that can be repositioned vertically as the canopy height changes during the production cycle. The net can also be folded and its hooks relocated to fit smaller grow spaces within the same tent, making it adaptable to partial-canopy configurations without requiring a separate net size. In practical terms, the AC-ETB33 delivers 81-cell elastic canopy management across a 91.4 x 91.4 cm footprint, deployable in horizontal, vertical, or A-frame configurations with four-corner steel hook mounting and a 2-year product warranty.

Configuration Decoder

Commercial Assurance

• Warranty: Effortless 2-Year Product Warranty — applies to all SKUs in the elastic trellis netting line (AC-ETB22, AC-ETB24, AC-ETB33, AC-ETB44, AC-ETB55).
• Return Window: Free and easy returns within 30 days of delivery.
• Authorized Channel: Cannafull Spectrum Solutions is a factory-authorized dealer for AC Infinity products. All units are sourced through authorized distribution and carry full manufacturer warranty support.
• Material Standard: Elastic rubber core shrouded in high-quality polyester — interweaving construction rated for heavy fruiting and flowering load without stem abrasion.
• Redeployment: Net is designed for multi-cycle use. Elastic recovery and non-abrasive cell construction support repeated deployment and removal without structural degradation.

System Integration

• Grow Tent Frame Compatibility: Four-corner steel hooks are designed for direct engagement with steel crossbar frames standard in enclosed grow tent ecosystems. No additional hardware required for initial deployment.
• Height Adjustment Integration: The hook system allows vertical repositioning of the net along the frame without disassembling the canopy layer, supporting progressive height management as the plant canopy develops through the production cycle.
• Environmental Control Compatibility: The open-cell elastic structure does not impede airflow from circulation fans or atmospheric control systems positioned above or below the canopy plane.
• Lighting Infrastructure: Horizontal deployment positions the canopy layer at a consistent distance from overhead lighting, supporting uniform light distribution across the 3 x 3 ft. footprint when paired with appropriately sized grow lighting.
• Multi-Cycle Redeployment: Elastic recovery properties allow the net to be removed, cleaned, and redeployed across successive production cycles without requiring replacement, reducing per-cycle consumable cost.

Facility Integration Data

The following table models per-unit and fleet-level acquisition cost for the AC-ETB33 across standard craft operator deployment scales, providing a direct input for operational budgeting and procurement planning.

Operator Field Notes

• Pre-Deployment Sizing: The AC-ETB33 rests at 28.35 x 28.35 in. (72 x 72 cm) before stretching. Confirm your frame's interior crossbar span accommodates the stretched 3 x 3 ft. (91.4 x 91.4 cm) footprint before installation. For tents with interior dimensions smaller than 3x3 ft., the net can be folded and hooks relocated to fit the reduced span.
• Hook Engagement: Steel hooks are designed for engagement with round or square steel crossbars. Verify that your tent frame's crossbar diameter is within the hook's grip range before applying load. Hooks should seat fully before the net is tensioned with plant weight.
• Horizontal vs. Vertical Deployment: Horizontal SCROG deployment is the primary use case for the 3x3 footprint. Vertical deployment is viable for climbing crops but requires anchor points on opposing frame members to maintain net tension across the full cell array.
• Load Distribution: The interweave construction distributes fruiting weight across the net rather than concentrating stress at individual nodes. Avoid overloading a single cell with disproportionate branch weight — distribute lateral growth across multiple cells during training to maintain net geometry.
• Cleaning Between Cycles: Elastic polyester construction is compatible with standard equipment cleaning protocols. Remove the net from the frame before cleaning. Allow full drying before redeployment to prevent moisture retention in the cord sheathing.
• Multi-Size Environments: Operators running multiple tent sizes should reference the full line (AC-ETB22 through AC-ETB55) to match net footprint to each tent's canopy zone. Mixing net sizes across a facility is operationally straightforward — all variants share the same hook system and mounting protocol.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this zone cannot be processed.
• Carrier & Transit: Standard ground shipping applies to all AC Infinity trellis netting orders. Expedited options may be available at checkout depending on destination zip code and carrier availability.
• Returns: Free and easy returns are accepted within 30 days of delivery for all AC Infinity products purchased through Cannafull Spectrum Solutions, subject to the conditions outlined in our Return Policy.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, volume procurement inquiries, or warranty claims, contact Cannafull Spectrum Solutions directly at cannafullspec.com.

What's in the Box

• 1x AC Infinity Grow Tent Trellis Netting 3x3' (SKU: AC-ETB33) — elastic polyester interweave construction, non-stretched dimensions 28.35 x 28.35 in. (72 x 72 cm), stretched to 3 x 3 ft. (91.4 x 91.4 cm), 81 cells
• 4x Corner steel hooks — pre-attached at the four corners of the net for direct frame engagement

Note: Box contents confirmed from manufacturer source data for SKU AC-ETB33. No additional accessories, mounting hardware, or documentation items are specified in the source data beyond the net and integrated corner hooks. If your shipment is missing any confirmed item, contact Cannafull Spectrum Solutions within 30 days of delivery.

Regional Compliance & Deployment Notes

• Jurisdiction: The AC Infinity Grow Tent Trellis Netting 3x3' (AC-ETB33) is available for purchase and deployment across the contiguous 48 United States through Cannafull Spectrum Solutions.
• Material Compliance: The elastic polyester interweave construction does not contain materials subject to restricted substance regulations under standard U.S. agricultural equipment guidelines. Operators in jurisdictions with specific material restrictions for enclosed cultivation environments should verify local compliance requirements independently.
• Licensed Facility Use: The AC-ETB33 is deployed in licensed commercial cultivation facilities across the United States. No facility-level permits or regulatory approvals are required for the use of passive canopy support netting in enclosed grow environments under current U.S. federal and state agricultural equipment frameworks.
• Manufacturer: AC Infinity Inc. Products are distributed through authorized U.S. dealer channels. Cannafull Spectrum Solutions is a factory-authorized dealer. Warranty and return claims are processed through Cannafull Spectrum Solutions in accordance with AC Infinity's manufacturer warranty terms.
• UPC: 819137022782 (AC-ETB33)

Compliance information is provided for general reference only. Cannafull Spectrum Solutions does not provide legal or regulatory compliance advice. Operators are responsible for verifying that all equipment deployments meet applicable local, state, and federal requirements for their specific facility type and jurisdiction. Information current as of publication date and subject to change without notice.