Tienda de cultivo avanzada AC Infinity CLOUDLAB 733 | 3 x 3 | Lona Mylar con diseño de diamante de 2000 D | 36" x 36" x 72"

Precision Control in Any Space

Every uncontrolled variable inside a cultivation enclosure is a yield event waiting to fail. Light leaks during dark cycles disrupt photoperiod integrity. Thin canvas walls flex under negative pressure, breaking the atmospheric seal and allowing humidity and temperature to drift. Undersized poles deflect under equipment load, shifting fixture positioning and destroying canopy uniformity. Flimsy zippers fail mid-cycle. Duct ports without proper cinching bleed conditioned air and introduce ambient contamination. These are not edge cases — they are the predictable failure modes of enclosures built to a price point rather than a performance standard, and every one of them silently erodes the consistency that separates a repeatable operation from a variable one.

After deploying the CLOUDLAB 733, the enclosure becomes a controlled variable rather than a liability. The interior holds a stable microclimate — humidity, temperature, and CO2 behave predictably because the envelope is sealed. Controllers mount to a dedicated steel plate with a lightproof cable passthrough, eliminating improvised cord routing that punches holes in the light barrier. Ductwork connects through cinched ports that maintain seal integrity under active negative pressure. The operator interacts with the environment on a scheduled basis through a full-height observation window rather than breaking the seal for every inspection. The enclosure stops fighting the operator and starts executing the program.

The mechanism behind that stability is structural and material. The outer shell is 2000D Oxford canvas — a density rating that resists puncture, abrasion, and pressure deformation under continuous operation. The interior is lined with reengineered diamond-pattern Mylar, lab-tested using an Agilent UV-Vis-NIR Spectrophotometer for maximum light reflectivity, ensuring photons emitted by the fixture are redirected to the canopy rather than absorbed by the wall. The frame is constructed from 22mm steel tubes with reinforced corner connectors, rated to 250 lbs on the beam and 300 lbs on the full frame — sufficient to support commercial-grade fixtures, inline fans, carbon filters, and supplemental equipment simultaneously. Nine duct openings — four 4-inch, two 6-inch, and three 8-inch — provide full HVAC integration flexibility, and the SBS zipper system with front flap overlap delivers a light-proof seal at the access point. In practical terms, the CLOUDLAB 733 delivers a fully sealed, reflective cultivation volume of 90.0 x 90.0 x 180.0 cm within a 35.43" x 35.43" x 70.86" footprint, supported by a 300 lb-rated steel frame with nine configurable duct ports.

Where This Belongs (and Doesn't)

Electrical and HVAC integration must comply with applicable local codes. Duct port sizing and fan selection should be calculated against the enclosure volume (90.0 x 90.0 x 180.0 cm) and target air exchange rate. Circuit load planning for lighting, climate, and control equipment is the operator's responsibility. Consult a licensed electrician for dedicated circuit installation.

How It Works

The CLOUDLAB 733 operates as a sealed atmospheric enclosure — every material and structural decision is made in service of maintaining a stable, controllable interior environment. The outer shell is constructed from 2000D Oxford canvas, a weave density that resists deformation under continuous negative pressure and prevents light transmission through the wall substrate. The 500G light-proof layer integrated into the canvas construction eliminates photoperiod contamination at the wall level, and front zipper flaps add a secondary overlap barrier at the highest-risk light-leak point in any tent design.

Interior reflectivity is engineered rather than assumed. The diamond-pattern Mylar lining has been lab-tested with an Agilent UV-Vis-NIR Spectrophotometer — a calibrated optical measurement instrument — to verify maximum light reflectivity performance. This means photons from the mounted fixture are redirected toward the canopy rather than absorbed by the enclosure walls, improving effective light utilization without increasing electrical draw.

The structural system is built around 22mm steel tubes — the thickest poles in the CLOUDLAB line — with reinforced corner connectors that resist racking under asymmetric load. The frame supports 300 lbs total and 250 lbs on a single beam, accommodating commercial-grade LED fixtures, inline fans, carbon filters, and supplemental equipment without deflection. Two primary hanging bars plus two additional bars provide four mounting positions for equipment distribution across the canopy plane.

Climate integration is handled through nine duct openings: four 4-inch ports, two 6-inch ports, and three 8-inch ports, each with double-cinching collars on both sides of the tent wall to maintain seal integrity under active airflow. The rear intake measures 5.90" x 13.77" (15.0 x 35.0 cm) and the side intake matches at 5.90" x 13.77" (15.0 x 35.0 cm), providing passive intake pathways sized for high-volume air exchange. The integrated controller mounting plate — a steel plate with a lightproof cable passthrough — provides a dedicated surface for fan speed controllers, lighting timers, and environmental monitors, eliminating improvised cord routing that compromises the light seal. SBS-grade zippers with front flap overlap complete the access system, delivering smooth operation and a light-proof closure at the primary entry point. In practical terms, the CLOUDLAB 733 delivers a fully sealed cultivation volume of 90.0 x 90.0 x 180.0 cm with a 300 lb-rated steel frame, nine configurable duct ports, and a dedicated controller mounting system within a 35.43" x 35.43" x 70.86" footprint.

The observation window measures 13.77" x 39.37" (35.0 x 100.0 cm) — a full-height panel that allows complete canopy inspection without breaking the atmospheric seal or interrupting the photoperiod. The heavy-duty catch tray with reflective waterproof lining contains runoff at the floor level, protecting the installation surface and maintaining a clean operational environment.

Commercial Assurance

Cannafull Spectrum Solutions is a factory-authorized dealer for AC Infinity. Every CLOUDLAB 733 unit sold through this listing is a genuine, factory-sealed product covered under the manufacturer's warranty program. Warranty terms for this product are not specified in current source documentation — contact Cannafull Spectrum Solutions or AC Infinity directly to confirm active warranty coverage before deployment.

• Authorized Channel: Factory-direct supply chain — no gray market, no repackaged units
• Warranty Status: Manufacturer warranty applies; confirm current terms with AC Infinity prior to purchase
• Support: Pre-sale technical consultation and post-sale integration support available through Cannafull Spectrum Solutions
• Compliance: Product ships within the contiguous 48 United States only

System Integration

• Lighting: Four hanging bar positions (2 primary + 2 additional) support commercial LED fixtures up to 250 lbs per beam; fixture positioning is fixed by the 70.86" interior height, which accommodates most 3x3-footprint LED systems with standard mounting clearance
• Climate Control: Nine duct ports (four 4-inch, two 6-inch, three 8-inch) with double-cinching collars integrate with inline fans, carbon filters, and active HVAC equipment; the controller mounting plate with lightproof cable passthrough centralizes environmental controller installation
• Environmental Monitoring: The lightproof cable passthrough on the controller plate allows sensor cables and power leads to exit the enclosure without compromising the light seal — compatible with temperature, humidity, CO2, and VPD monitoring systems
• Irrigation: The reflective waterproof catch tray at the floor level contains runoff from up to 3 plants at 5-gallon container capacity; drain management planning should account for the 35.43" x 35.43" floor footprint
• Supplemental Equipment: Additional cinched duct ports on both sides of the tent accommodate humidifiers, dehumidifiers, heaters, and portable A/C units without requiring permanent wall penetrations or compromising the atmospheric seal

Facility Integration Data

The following ROI framework is provided for operators evaluating multi-unit deployment of the CLOUDLAB 733 at $239.00 per unit (SKU: AC-CBA733). Use these figures as a capital planning baseline — actual yield and operational outcomes depend on cultivation program, equipment selection, and facility management.

Operator Field Notes

• Frame Assembly Sequence: The pole system uses A poles (x8), B poles (x4), C poles (x4), and D1 connectors (x8) with E bars (x2) and F bars (x2) — follow the documented assembly sequence from the manual to ensure corner connector seating under load; improperly seated D1 connectors are the primary cause of frame racking in field installations
• Controller Plate Positioning: The steel controller mounting plate ships with adhesive pads (x6), wall screws (x4), and controller screws (x4) — use the screw-mount method for permanent installations; adhesive mounting is appropriate for temporary or reconfigurable setups only
• Duct Port Cinching: Each duct port uses a double-cinch collar; cinch the interior collar first under negative pressure to confirm seal, then secure the exterior collar — reversing this sequence reduces seal effectiveness at the wall penetration point
• Zipper Maintenance: SBS zippers perform at rated specification without lubrication under normal operating conditions; if resistance develops, apply a dry zipper lubricant to the track — do not use petroleum-based products, which degrade the zipper tape and canvas interface over time
• Observation Window Protocol: The 13.77" x 39.37" window is adjustable and maintains climate control when closed; schedule canopy inspections through the window during the active photoperiod to avoid unnecessary seal breaks and photoperiod interruption
• Catch Tray Management: The reflective waterproof spill tray is rated for the 35.43" x 35.43" floor footprint; establish a drain interval based on irrigation volume per cycle to prevent tray overflow, which is the most common cause of floor damage in sealed enclosure deployments

Operator FAQ

Shipping and Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international destinations cannot be fulfilled through this listing.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times will be provided at checkout based on destination. Freight damage must be documented at time of delivery and reported to Cannafull Spectrum Solutions within 48 hours of receipt.
• Returns: Returns of defective units are handled under the manufacturer warranty process. Non-defective returns must be initiated within the return window specified in our Return Policy at cannafullspec.com/pages/return-policy. Units must be returned in original, unassembled condition with all included components.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For pre-sale technical consultation or post-sale support, contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

The following items are confirmed included with the CLOUDLAB 733 (SKU: AC-CBA733) based on manufacturer documentation:

• Grow Tent x1 (35.43" x 35.43" x 70.86")
• Controller Plate x1
• Spill Tray x1
• Filter Straps x2
• Controller Adhesive x6
• Controller Screws x4
• Wall Screws x4
• Cable Ties x4
• Frame Poles: A poles x8, B poles x4, C poles x4
• D1 Connectors x8
• E Bars x2
• F Bars x2
• Detachable Tool Bag x1

Note: This contents list is based on manufacturer documentation cross-referenced at time of listing. Cannafull Spectrum Solutions is not responsible for manufacturer packaging changes. If your shipment is missing any documented component, contact our support team within 48 hours of receipt. Lighting fixtures, fans, carbon filters, controllers, and growing media are not included and must be sourced separately.

Regional Compliance and Deployment Notes

• Jurisdiction: The CLOUDLAB 733 is sold and shipped within the contiguous 48 United States only. Cannafull Spectrum Solutions does not fulfill orders to Canadian provinces, U.S. territories, or international destinations through this listing.
• Cultivation Compliance: The operator is solely responsible for ensuring that cultivation activities conducted within this enclosure comply with all applicable federal, state, and local laws and regulations. Cannafull Spectrum Solutions makes no representation regarding the legality of any specific cultivation activity in any jurisdiction.
• Electrical Code: Installation of lighting, climate control, and monitoring equipment within or connected to this enclosure must comply with the National Electrical Code (NEC) and any applicable state or local amendments. Dedicated circuit installation should be performed by a licensed electrician.
• Building Code: Permanent or semi-permanent installation of cultivation enclosures in commercial or mixed-use facilities may require building permits or landlord approval depending on local jurisdiction. Operators are responsible for obtaining all required approvals before deployment.
• Fire Safety: Maintain clear access to the enclosure at all times. Do not obstruct egress pathways with equipment or cabling. Ensure all electrical connections are properly rated for continuous-duty operation and inspected per local fire code requirements.
• Product Certification: Verify current product certification status with AC Infinity for any jurisdiction-specific compliance requirements applicable to your facility's licensing conditions.